<?xml version="1.0" encoding="UTF-8"?>
<!--Copyright (c) 2015-2018 Qualcomm Technologies, Inc.
    All Rights Reserved.
    Confidential and Proprietary - Qualcomm Technologies, Inc.-->
<AndsfPolicy><Andsf>
	    <Version>5.1</Version>
		<Name>Test 1</Name>
		<Ext>
			<WQE>
				<InterfaceManager>
					<BQE_Disabled>true</BQE_Disabled>
					<ICD_Disabled>true</ICD_Disabled>
					<!-- Default bqe thresholds where no apIds are specified. -->
					<BQE_Thresholds Id="128">
						<RadioTechnology Type="CDMA2000">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="EVDO_0">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="EVDO_A">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="EVDO_B">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="EDGE">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="UMTS">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="HSPA">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="HSDPA">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="GPRS">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="LTE">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="EHRPD">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
						<RadioTechnology Type="HSPAP">
							<Threshold units="bps">0</Threshold>
						</RadioTechnology>
					</BQE_Thresholds>
					<Authentication>
						<MaxAuthTime>60</MaxAuthTime>
						<IcdBanRetest>3</IcdBanRetest>
						<AuthApps>
							<Appname>someauthapp1</Appname>
							<Appname>someauthapp2</Appname>
							<Appname>someauthapp3</Appname>
						</AuthApps>
					</Authentication>
					<ICD config-type="disabled">
					</ICD>
                    <TQE>
                        <!-- Default node for TQE_Thresholds element -->
                        <TQE_Thresholds Id="128">
                            <!-- Disabling Broken Backhaul Detector module -->
                            <BBD_Disabled>true</BBD_Disabled>
                            <!-- Disabling Degraded Backhaul Detector module -->
                            <DBD_Disabled>true</DBD_Disabled>
                            <!-- Threshold on downlink gap indicator metric -->
                            <DGIMThresh units="msecs">400</DGIMThresh>
                            <!-- DBD always returns pass when average device throughput is greater than min(DBDTputThresh,BQE_Threshold) -->
                            <DBDTputThresh units="bps">1000000</DBDTputThresh>
                            <!-- Time window for TQE history -->
                            <TQETimeWindow units="secs">77</TQETimeWindow>
                            <!-- Minimum fraction of sockets reporting BAD (among valid ones) to declare TQE FAIL -->
                            <RatioThresh>0.2</RatioThresh>
                        </TQE_Thresholds>
                    </TQE>
				</InterfaceManager>
			</WQE>
			<CQE prodId="Rome">
				<!-- Default node for CQE_Thresholds element -->
				<CQE_Thresholds Id="128">
                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
					<!-- a candidate for interface selection -->
					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
					<!-- a candidate for interface selection -->
					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
					<!-- Interval over whcih RSSI values are averaged -->
					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
					<!-- Setting CQETimer to zero disables the CQE -->
					<CQETimer units="secs">2</CQETimer>
					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
					<MACStatsAveragingAlpha>0.55</MACStatsAveragingAlpha>
					<!-- Threshold for RX MPDU PER -->
					<RMP_THR>1</RMP_THR>
					<!-- Minimum MPDU count to activate RX MPDU PER -->
					<RMP_CNT_THR>4</RMP_CNT_THR>
					<!-- Cutoff RX MCS index -->
					<RX_MCS_THR>9</RX_MCS_THR>
					<!-- Cutoff RX BW index -->
					<RX_BW_THR>3</RX_BW_THR>
					<!-- Threshold for TX MSDU drop -->
					<TMD_THR>1</TMD_THR>
					<!-- Minimum MSDU count to activate TX MSDU drop -->
					<TMD_CNT_THR>2</TMD_CNT_THR>
					<!-- Threshold for MPDU retry rate -->
					<TMR_THR>1</TMR_THR>
					<!-- Minimum MPDU count to activate MPDU retry rate -->
					<TMR_CNT_THR>50</TMR_CNT_THR>
					<!-- Cutoff TX MCS index -->
					<TX_MCS_THR>8</TX_MCS_THR>
					<!-- Cutoff TX BW index -->
					<TX_BW_THR>2</TX_BW_THR>
					<!-- Maximum MPDU count to activate RX MPDU PER -->
					<RMP_UBCNT_THR>100</RMP_UBCNT_THR>
					<!-- Maximum MPDU count to activate MPDU retry rate -->
					<TMR_UBCNT_THR>300</TMR_UBCNT_THR>
					<!-- Threshold for PERAM -->
					<PERAM_THR>1</PERAM_THR>
					<!-- Minimum MPDU count to activate PERAM -->
					<PERAM_CNT_THR>4</PERAM_CNT_THR>
					<!-- Maximum MPDU count to activate PERAM -->
					<PERAM_UBCNT_THR>80</PERAM_UBCNT_THR>
					<!-- CQE throughput Threshold-->
					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
				</CQE_Thresholds>
			</CQE>
		    <CQE prodId="Helium">
				<!-- Default node for CQE_Thresholds element -->
				<CQE_Thresholds Id="128">
                    <!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
					<!-- a candidate for interface selection -->
					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
					<!-- a candidate for interface selection -->
					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
					<!-- Interval over whcih RSSI values are averaged -->
					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
					<RSSIMacTimerThreshold units="dbm">-85</RSSIMacTimerThreshold>
					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
					<!-- Setting CQETimer to zero disables the CQE -->
					<CQETimer units="secs">2</CQETimer>
					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
					<MACStatsAveragingAlpha>0.64</MACStatsAveragingAlpha>
					<!-- Threshold for RX MPDU PER -->
					<RMP_THR>1</RMP_THR>
					<!-- Minimum MPDU count to activate RX MPDU PER -->
					<RMP_CNT_THR>12</RMP_CNT_THR>
					<!-- Cutoff RX MCS index -->
					<RX_MCS_THR>3</RX_MCS_THR>
					<!-- Cutoff RX BW index -->
					<RX_BW_THR>3</RX_BW_THR>
					<!-- Threshold for TX MSDU drop -->
					<TMD_THR>1</TMD_THR>
					<!-- Minimum MSDU count to activate TX MSDU drop -->
					<TMD_CNT_THR>2</TMD_CNT_THR>
					<!-- Threshold for MPDU retry rate -->
					<TMR_THR>1</TMR_THR>
					<!-- Minimum MPDU count to activate MPDU retry rate -->
					<TMR_CNT_THR>60</TMR_CNT_THR>
					<!-- Cutoff TX MCS index -->
					<TX_MCS_THR>8</TX_MCS_THR>
					<!-- Cutoff TX BW index -->
					<TX_BW_THR>2</TX_BW_THR>
					<!-- Maximum MPDU count to activate RX MPDU PER -->
					<RMP_UBCNT_THR>1000</RMP_UBCNT_THR>
					<!-- Maximum MPDU count to activate MPDU retry rate -->
					<TMR_UBCNT_THR>1000</TMR_UBCNT_THR>
					<!-- Threshold for PERAM -->
					<PERAM_THR>1</PERAM_THR>
					<!-- Minimum MPDU count to activate PERAM -->
					<PERAM_CNT_THR>20</PERAM_CNT_THR>
					<!-- Maximum MPDU count to activate PERAM -->
					<PERAM_UBCNT_THR>1000</PERAM_UBCNT_THR>
					<!-- CQE throughput Threshold-->
					<CQE_TPUT_THR>1000000</CQE_TPUT_THR>
				</CQE_Thresholds>
			</CQE>
			<CQE prodId="Pronto">
				<!-- Default node for CQE_Thresholds element -->
				<CQE_Thresholds Id="128">
					<!-- RSSI threshold from which all values greather than it is considered as good for wlan to be -->
					<!-- a candidate for interface selection -->
					<RSSIAddThreshold units="dbm">-79,-79</RSSIAddThreshold>
					<!-- RSSI threshold from which all values lesser than it is considered as bad for wlan to be -->
					<!-- a candidate for interface selection -->
					<RSSIDropThreshold units="dbm">-79,-79</RSSIDropThreshold>
					<!-- RSSI threshold from which to select linear model to compute CQE metric -->
					<RSSIModelThreshold units="dbm">-74</RSSIModelThreshold>
					<!-- Interval over whcih RSSI values are averaged -->
					<RSSIAveragingInterval units="secs">5</RSSIAveragingInterval>
					<!-- RSSI threshold below which MAC hysteresis timer is not started -->
					<RSSIMacTimerThreshold units="dbm">-91</RSSIMacTimerThreshold>
					<!-- Periodic timer to evaluate CQE parameters including RSSI and MAC stats -->
					<!-- Setting CQETimer to zero disables the CQE -->
					<CQETimer units="secs">2</CQETimer>
					<!-- Time for which CQE is not reevaluted after it was declared bad due to MAC stats -->
					<MACHysteresisTimer units="secs">120</MACHysteresisTimer>
					<!-- Alpha to compute RSSI averaging based on IIR filtering mechanism -->
					<MACStatsAveragingAlpha>0.47</MACStatsAveragingAlpha>
					<!-- The threshold indicating the number of frames below which no valid CQE estimation can't be done -->
					<FrameCntThreshold units="frames">8</FrameCntThreshold>
					<!-- The threshold indicating the number of last samples below which valid CQE estimation can't be done -->
					<ColdStartThreshold units="frames">2</ColdStartThreshold>
					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
					<!-- such as retry, multi-retry, fail and  ack fail metric -->
					<!-- when average RSSI is greater than RSSIModelThreshold -->
                    <MACMibThreshold2a>1</MACMibThreshold2a>
					<!-- The weightage that given to retry metric in computation of CQE -->
					<!-- when average RSSI is greater than RSSIModelThreshold -->
					<RetryMetricWeight2a>0.0597</RetryMetricWeight2a>
					<!-- The weightage that given to multi-retry metric in computation of CQE -->
					<!-- when average RSSI is greater than RSSIModelThreshold -->
					<MultiRetryMetricWeight2a>0.8895</MultiRetryMetricWeight2a>
					<!-- The threshold that ultimately decides the wlan is good or bad based on the combined MAC parameters -->
					<!-- such as retry, multi-retry, fail and  ack fail metric -->
					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
					<MACMibThreshold2b>1</MACMibThreshold2b>
					<!-- The weightage that given to retry metric in computation of CQE -->
					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
					<RetryMetricWeight2b>0.1366</RetryMetricWeight2b>
					<!-- The weightage that given to multi-retry metric in computation of CQE -->
					<!-- when average RSSI is less than or equal to RSSIModelThreshold -->
					<MultiRetryMetricWeight2b>0.5795</MultiRetryMetricWeight2b>
				</CQE_Thresholds>
			</CQE>
		</Ext>
	</Andsf></AndsfPolicy>
