b76c7be1db
* Avoid direct access to kmsg for logging purpose. * Load touchscreen driver on early-init for labelling its sysfs nodes. Change-Id: I7bb86c270d81dbd6f4bdc66e78ac77e44b61e708
205 lines
8.5 KiB
Plaintext
205 lines
8.5 KiB
Plaintext
# NFC ST21NFC
|
|
import /vendor/etc/init/hw/init.vendor.st21nfc.rc
|
|
|
|
# import /vendor/etc/init/hw/init.vendor.st21nfc.rc
|
|
on early-init
|
|
setprop ro.vendor.device_edition ${ro.boot.edition}
|
|
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules qpnp-smbcharger-mmi qpnp_adaptive_charge
|
|
exec u:r:vendor_modprove:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules touchscreen_mmi.ko stmicro_mmi.ko
|
|
|
|
on mmi-priority
|
|
# Only high priority MMI DLKMs loaded here
|
|
# For instance, sensor_class referenced from several DLKMs
|
|
# and needs to load first. Touchscreen might need extra time
|
|
# to perform firmware update if necessary
|
|
setprop vendor.mmi_init.stage priority
|
|
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules sensors_class.ko
|
|
|
|
on fs
|
|
# Majority of MMI DLKMs should be in this group
|
|
setprop vendor.mmi_init.stage common
|
|
insmod /vendor/lib/modules/wl2866d.ko
|
|
insmod /vendor/lib/modules/mmi_info.ko
|
|
insmod /vendor/lib/modules/mmi_annotate.ko
|
|
insmod /vendor/lib/modules/mmi_sys_temp.ko
|
|
insmod /vendor/lib/modules/qpnp-power-on-mmi.ko
|
|
insmod /vendor/lib/modules/bq2597x_mmi.ko
|
|
insmod /vendor/lib/modules/mmi_parallel_charger.ko
|
|
insmod /vendor/lib/modules/mmi_parallel_charger_qc3p.ko
|
|
insmod /vendor/lib/modules/mmi_annotate.ko
|
|
insmod /vendor/lib/modules/mmi_info.ko
|
|
insmod /vendor/lib/modules/tzlog_dump.ko
|
|
insmod /vendor/lib/modules/watchdog_cpu_ctx.ko
|
|
insmod /vendor/lib/modules/mmi_relay.ko
|
|
insmod /vendor/lib/modules/sx937x_sar.ko
|
|
insmod /vendor/lib/modules/st21nfc.ko
|
|
insmod /vendor/lib/modules/stmvl53l1.ko
|
|
exec u:r:vendor_modprobe:s0 -- /vendor/bin/modprobe -a -d /vendor/lib/modules aw882xx_k419.ko aw8695.ko
|
|
|
|
on post-fs
|
|
# "double tap" gesture
|
|
chown root input /sys/class/sensors/dt-gesture/enable
|
|
chmod 0660 /sys/class/sensors/dt-gesture/enable
|
|
chown root input /sys/class/sensors/dt-gesture/enable_wakeup
|
|
chmod 0660 /sys/class/sensors/dt-gesture/enable_wakeup
|
|
chown root input /sys/class/sensors/dt-gesture/flush
|
|
chmod 0660 /sys/class/sensors/dt-gesture/flush
|
|
chown root input /sys/class/sensors/dt-gesture/max_latency
|
|
chmod 0660 /sys/class/sensors/dt-gesture/max_latency
|
|
chown root input /sys/class/sensors/dt-gesture/poll_delay
|
|
chmod 0660 /sys/class/sensors/dt-gesture/poll_delay
|
|
|
|
# Change ownership and permision of st nfc device
|
|
chown nfc nfc /dev/st21nfc
|
|
chmod 0660 /dev/st21nfc
|
|
|
|
on post-fs-data
|
|
# Load DLKM that can afford being loaded later
|
|
setprop vendor.mmi_init.stage late
|
|
start vendor.mmi_modules
|
|
wait_for_prop init.svc.vendor.mmi_modules stopped
|
|
setprop vendor.mmi_init.stage complete
|
|
|
|
service vendor.stflashtool /vendor/bin/STFlashTool -c /vendor/etc/st21nfc_conf.txt -P vendor.nfc.fw_status
|
|
group nfc
|
|
user nfc
|
|
oneshot
|
|
disabled
|
|
|
|
service vendor.mmi_modules /vendor/bin/init.mmi.modules.sh
|
|
user root
|
|
oneshot
|
|
disabled
|
|
|
|
service vendor.vl53l1_daemon /vendor/bin/vl53l1_daemon
|
|
class late_start
|
|
user root
|
|
group root
|
|
socket vl53l1_daemon stream 660 root system
|
|
|
|
service vendor.mmi-laser-sh /vendor/bin/init.mmi.laser.sh
|
|
class core
|
|
user root
|
|
oneshot
|
|
|
|
|
|
service vendor.ftmipcd2 /vendor/bin/ftmipcd2
|
|
user radio
|
|
group radio net_raw inet oem_2901
|
|
capabilities NET_RAW
|
|
disabled
|
|
oneshot
|
|
|
|
on property:ro.bootmode=factory
|
|
start vendor.ftmipcd2
|
|
|
|
on property:ro.bootmode=mot-factory
|
|
start vendor.ftmipcd2
|
|
|
|
on init
|
|
write /sys/block/zram0/comp_algorithm lz4
|
|
|
|
on boot
|
|
# Add for goodix fingerprint
|
|
chown system system /dev/goodix_fp
|
|
chmod 0664 /dev/goodix_fp
|
|
mkdir /data/vendor/gf_data 0770 system system
|
|
mkdir /mnt/vendor/persist/goodix 0770 system system
|
|
# Add for CQA fps calibration test
|
|
chown system system /sys/class/backlight/panel0-backlight/brightness
|
|
chown system system /d/dri/0/debug/motUtil
|
|
chmod 0666 /d/dri/0/debug/motUtil;
|
|
chmod 0666 /sys/class/backlight/panel0-backlight/brightness
|
|
# Set wls perms for HAL
|
|
chown system system /sys/class/power_supply/wireless/device/tx_mode
|
|
#Add for laser
|
|
chown system system sys/class/laser/stmvl53l1/enable_sar
|
|
chmod 0660 sys/class/laser/stmvl53l1/enable_sar
|
|
chown system system sys/class/laser/stmvl53l1/set_delay_ms
|
|
chmod 0660 sys/class/laser/stmvl53l1/set_delay_ms
|
|
chown system system sys/class/laser/stmvl53l1/autonomous_config
|
|
chmod 0660 sys/class/laser/stmvl53l1/autonomous_config
|
|
chown system system sys/class/laser/stmvl53l1/enable_ps_sensor
|
|
chmod 0660 sys/class/laser/stmvl53l1/enable_ps_sensor
|
|
chown system system sys/class/laser/stmvl53l1/do_flush
|
|
chmod 0660 sys/class/laser/stmvl53l1/do_flush
|
|
chown system /sys/devices/virtual/laser/stmvl53l1/enable_sar
|
|
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/enable_sar
|
|
chown system /sys/devices/virtual/laser/stmvl53l1/set_delay_ms
|
|
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/set_delay_ms
|
|
chown system /sys/devices/virtual/laser/stmvl53l1/do_flush
|
|
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/do_flush
|
|
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/autonomous_config
|
|
chown system /sys/devices/virtual/laser/stmvl53l1/autonomous_config
|
|
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/enable_ps_sensor
|
|
chown system /sys/devices/virtual/laser/stmvl53l1/enable_ps_sensor
|
|
chmod 0660 /sys/devices/virtual/laser/stmvl53l1/timing_budget
|
|
chown system /sys/devices/virtual/laser/stmvl53l1/timing_budget
|
|
chown system system /sys/devices/virtual/input/input1/timing_budget
|
|
chmod 0660 /sys/devices/virtual/input/input1/timing_budget
|
|
chmod 0664 /mnt/vendor/persist/camera/focus/offset_cal
|
|
chmod 0664 /mnt/vendor/persist/camera/focus/cal_data
|
|
# Touch grip suppression control
|
|
chown system system /sys/class/touchscreen/primary/suppression
|
|
chmod 0660 /sys/class/touchscreen/primary/suppression
|
|
chown system system /sys/class/touchscreen/primary/pill_region
|
|
chmod 0660 /sys/class/touchscreen/primary/pill_region
|
|
chown system system /sys/class/touchscreen/primary/hold_distance
|
|
chmod 0660 /sys/class/touchscreen/primary/hold_distance
|
|
chown system system /sys/class/touchscreen/primary/gs_distance
|
|
chmod 0660 /sys/class/touchscreen/primary/gs_distance
|
|
chown system system /sys/class/touchscreen/primary/rotate
|
|
chmod 0660 /sys/class/touchscreen/primary/rotate
|
|
chown system system /sys/class/touchscreen/primary/interpolation
|
|
chmod 0660 /sys/class/touchscreen/primary/interpolation
|
|
chown system system /sys/class/touchscreen/primary/edge
|
|
chmod 0660 /sys/class/touchscreen/primary/edge
|
|
# Change ownership for capsensor
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch0/enable
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch0/poll_delay
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch1/enable
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch1/poll_delay
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch2/enable
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch2/poll_delay
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch3/enable
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch3/poll_delay
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch4/enable
|
|
chown root input /sys/class/sensors/Moto\ CapSense\ Ch4/poll_delay
|
|
chown system system /sys/class/capsense/reset
|
|
chown system system /sys/class/capsense/int_state
|
|
# Set adaptive charging perms for HAL
|
|
chown system system /sys/module/qpnp_adaptive_charge/parameters/upper_limit
|
|
chown system system /sys/module/qpnp_adaptive_charge/parameters/lower_limit
|
|
write /proc/sys/kernel/hung_task_timeout_secs 120
|
|
# Change ownership and permission for bq25960-standalone factory testing
|
|
chown system system /sys/class/power_supply/bq25960-standalone/voltage_now
|
|
chown system system /sys/class/power_supply/bq25960-standalone/charging_enabled
|
|
chmod 0644 /sys/class/power_supply/bq25960-standalone/voltage_now
|
|
chmod 0664 /sys/class/power_supply/bq25960-standalone/charging_enabled
|
|
|
|
#fps dual sensor
|
|
service vendor.ident-fps-overlay-sh /vendor/bin/init.oem.fingerprint.overlay.sh
|
|
class core
|
|
user root
|
|
group drmrpc system
|
|
oneshot
|
|
disabled
|
|
|
|
# Turn on led to indicate device on factory mode
|
|
on property:ro.bootmode=mot-factory
|
|
write /sys/class/leds/charging/brightness 255
|
|
|
|
on post-fs-data
|
|
mkdir /data/vendor/tzstorage/goodix 0770 system system
|
|
exec_start vendor.ident-fps-overlay-sh
|
|
|
|
service vendor.qrtr-lookup-sh /vendor/bin/init.mmi.qrtr-lookup.sh
|
|
class late_start
|
|
user root
|
|
group log system
|
|
oneshot
|
|
disabled
|
|
|
|
on property:sys.boot_completed=1
|
|
start vendor.qrtr-lookup-sh
|