sm8250-common: switch to qti bt stack

BoardConfigCommon.mk

@@ -131,6 +131,11 @@ BOARD_SUPPORTS_SOUND_TRIGGER := true
 BOARD_USES_ALSA_AUDIO := true
 USE_CUSTOM_AUDIO_POLICY := 1
 
+# Bluetooth
+BOARD_HAVE_BLUETOOTH_QCOM := true
+TARGET_FWK_SUPPORTS_FULL_VALUEADDS := true
+TARGET_USE_QTI_BT_STACK := true
+
 # Camera
 TARGET_USES_QTI_CAMERA_DEVICE := true
 USE_DEVICE_SPECIFIC_CAMERA := true

audio/audio_policy_configuration.xml

@@ -141,15 +141,6 @@
                 </devicePort>
                 <devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
                 </devicePort>
-                <devicePort tagName="BT A2DP Out" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP" role="sink"
-                encodedFormats="AUDIO_FORMAT_SBC AUDIO_FORMAT_AAC AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_CELT AUDIO_FORMAT_APTX_ADAPTIVE">
-                </devicePort>
-                <devicePort tagName="BT A2DP Headphones" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_HEADPHONES" role="sink"
-                encodedFormats="AUDIO_FORMAT_SBC AUDIO_FORMAT_AAC AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_CELT AUDIO_FORMAT_APTX_ADAPTIVE">
-                </devicePort>
-                <devicePort tagName="BT A2DP Speaker" type="AUDIO_DEVICE_OUT_BLUETOOTH_A2DP_SPEAKER" role="sink"
-                encodedFormats="AUDIO_FORMAT_SBC AUDIO_FORMAT_AAC AUDIO_FORMAT_LDAC AUDIO_FORMAT_APTX AUDIO_FORMAT_APTX_HD AUDIO_FORMAT_CELT AUDIO_FORMAT_APTX_ADAPTIVE">
-                </devicePort>
                 <devicePort tagName="HDMI Out" type="AUDIO_DEVICE_OUT_HDMI" role="sink">
                 </devicePort>
                 <devicePort tagName="Proxy" type="AUDIO_DEVICE_OUT_PROXY" role="sink">
@@ -198,12 +189,6 @@
                        sources="primary output,deep_buffer,voip_rx"/>
                 <route type="mix" sink="BT SCO Car Kit"
                        sources="primary output,deep_buffer,voip_rx"/>
-                <route type="mix" sink="BT A2DP Out"
-                       sources="primary output,deep_buffer,compressed_offload,voip_rx"/>
-                <route type="mix" sink="BT A2DP Headphones"
-                       sources="primary output,deep_buffer,compressed_offload,voip_rx"/>
-                <route type="mix" sink="BT A2DP Speaker"
-                       sources="primary output,deep_buffer,compressed_offload,voip_rx"/>
                 <route type="mix" sink="HDMI Out"
                        sources="primary output,deep_buffer,compressed_offload,voip_rx"/>
                 <route type="mix" sink="USB Device Out"
@@ -230,27 +215,8 @@
             </routes>
         </module>
 
-        <!-- A2dp Audio HAL -->
+        <!-- A2DP Input Audio HAL -->
-        <module name="a2dp" halVersion="2.0">
+        <xi:include href="a2dp_in_audio_policy_configuration.xml"/>
-            <mixPorts>
-                <mixPort name="a2dp input" role="sink">
-                    <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
-                             samplingRates="44100,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
-                </mixPort>
-            </mixPorts>
-
-            <devicePorts>
-                <devicePort tagName="BT A2DP In" type="AUDIO_DEVICE_IN_BLUETOOTH_A2DP" role="source">
-                    <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
-                             samplingRates="44100,48000" channelMasks="AUDIO_CHANNEL_IN_MONO,AUDIO_CHANNEL_IN_STEREO"/>
-                </devicePort>
-            </devicePorts>
-
-            <routes>
-                <route type="mix" sink="a2dp input"
-                       sources="BT A2DP In"/>
-            </routes>
-        </module>
 
         <!-- Usb Audio HAL -->
         <xi:include href="usb_audio_policy_configuration.xml"/>
@@ -258,6 +224,12 @@
         <!-- Remote Submix Audio HAL -->
         <xi:include href="r_submix_audio_policy_configuration.xml"/>
 
+        <!-- Bluetooth Audio HAL -->
+        <xi:include href="bluetooth_qti_audio_policy_configuration.xml"/>
+
+        <!-- Bluetooth Audio HAL for hearing aid -->
+        <xi:include href="bluetooth_qti_hearing_aid_audio_policy_configuration.xml"/>
+
     </modules>
     <!-- End of Modules section -->
 

configs/component-overrides.xml

@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<config>
+    <component-override package="com.android.bluetooth" >
+        <component class=".avrcpcontroller.AvrcpControllerService" enabled="true" />
+        <component class=".ba.BATService" enabled="true" />
+        <component class=".hid.HidDeviceService" enabled="true" />
+        <component class=".sap.SapService" enabled="true" />
+    </component-override>
+</config>

configs/component-overrides_qti.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<config>
+    <component-override package="com.android.bluetooth" >
+        <component class=".a2dpsink.A2dpSinkService" enabled="true" />
+        <component class=".avrcp.AvrcpTargetService" enabled="false" />
+    </component-override>
+</config>

sm8250.mk

@@ -106,10 +106,15 @@ PRODUCT_COPY_FILES += \
     $(LOCAL_PATH)/audio/audio_ext_spkr.conf:$(TARGET_COPY_OUT_VENDOR)/etc/audio_ext_spkr.conf \
     $(LOCAL_PATH)/audio/audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/audio_policy_configuration.xml \
     $(LOCAL_PATH)/audio/sound_trigger_mixer_paths.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_mixer_paths.xml \
-    $(LOCAL_PATH)/audio/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml \
+    $(LOCAL_PATH)/audio/sound_trigger_platform_info.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sound_trigger_platform_info.xml
 
 PRODUCT_COPY_FILES += \
-    frameworks/av/services/audiopolicy/config/a2dp_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_audio_policy_configuration.xml \
+    hardware/qcom-caf/sm8250/audio/configs/common/bluetooth_qti_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_qti_audio_policy_configuration.xml \
+    hardware/qcom-caf/sm8250/audio/configs/common/bluetooth_qti_hearing_aid_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_qti_hearing_aid_audio_policy_configuration.xml
+
+PRODUCT_COPY_FILES += \
+    frameworks/av/services/audiopolicy/config/a2dp_in_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/a2dp_in_audio_policy_configuration.xml \
+    frameworks/av/services/audiopolicy/config/bluetooth_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_audio_policy_configuration.xml \
     frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/r_submix_audio_policy_configuration.xml \
     frameworks/av/services/audiopolicy/config/usb_audio_policy_configuration.xml:$(TARGET_COPY_OUT_VENDOR)/etc/usb_audio_policy_configuration.xml
 
@@ -132,6 +137,11 @@ PRODUCT_PACKAGES += \
     Snap \
     vendor.qti.hardware.camera.postproc@1.0.vendor
 
+# Component overrides
+PRODUCT_COPY_FILES += \
+    $(LOCAL_PATH)/configs/component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/component-overrides.xml \
+    $(LOCAL_PATH)/configs/component-overrides_qti.xml:$(TARGET_COPY_OUT_SYSTEM)/etc/sysconfig/component-overrides.xml
+
 # Display
 PRODUCT_PACKAGES += \
     android.hardware.graphics.mapper@3.0-impl-qti-display \

system.prop

@@ -1,6 +1,10 @@
 # Audio
 audio.offload.min.duration.secs=60
 
+# Bluetooth
+persist.vendor.btstack.aac_frm_ctl.enabled=true
+ro.bluetooth.library_name=libbluetooth_qti.so
+
 # Charger
 ro.charger.enable_suspend=1