diff --git a/gps/flp.conf b/gps/flp.conf new file mode 100644 index 0000000..65d54d3 --- /dev/null +++ b/gps/flp.conf @@ -0,0 +1,60 @@ +################################### +##### FLP settings ##### +################################### + +################################### +# FLP BATCH SIZE +################################### +# The number of batched locations +# requested to modem. The desired number +# defined below may not be satisfied, as +# the modem can only return the number +# of batched locations that can be allocated, +# which is limited by memory. The default +# batch size defined as 20 as below. +BATCH_SIZE=20 + +################################### +# FLP OUTDOOR TRIP BATCH SIZE +################################### +# The number of batched locations +# requested to modem for outdoor +# trip batching. The desired number +# defined below may not be satisfied, as +# the modem can only return the number +# of batched locations that can be allocated, +# which is limited by memory. The default +# trip batch size defined as 600 as below. +OUTDOOR_TRIP_BATCH_SIZE=600 + +################################### +# FLP BATCHING SESSION TIMEOUT +################################### +# Duration with which batch session timeout +# happens in milliseconds. If not specified +# or set to zero, batching session timeout +# defaults to 20 seconds by the modem. +# BATCH_SESSION_TIMEOUT=20000 + +################################### +# FLP BATCHING ACCURACY +################################### +# Set to one of the defined values below +# to define the accuracy of batching. +# If not specified, accuracy defaults +# to LOW. +# FLP BATCHING ACCURACY values: +# Low accuracy = 0 +# Medium accuracy = 1 +# High accuracy = 2 +ACCURACY=1 + +#################################### +# By default if network fixes are not sensor assisted +# these fixes must be dropped. This parameter adds an exception +# for targets where there is no PDR and we still want to +# report out network fixes +# 0: MUST NOT ALLOW NETWORK FIXES +# 1: ALLOW NETWORK FIXES +#################################### +ALLOW_NETWORK_FIXES = 0 diff --git a/gps/gps.conf b/gps/gps.conf new file mode 100644 index 0000000..9a8a5a6 --- /dev/null +++ b/gps/gps.conf @@ -0,0 +1,314 @@ +#hardware/qcom/gps/loc_api/conf/gps.conf + +NI_SUPL_DENY_ON_NFW_LOCKED = 1 + +##################################### +# proxyAppPackageName +##################################### +# This is a string that is sent to the framework +# in nfwNotifyCb callback +# Add NFW package name +PROXY_APP_PACKAGE_NAME = com.motorola.nfwlocationattribution + +#Version check for XTRA +#DISABLE = 0 +#AUTO = 1 +#XTRA2 = 2 +#XTRA3 = 3 +XTRA_VERSION_CHECK=0 + +# Error Estimate +# _SET = 1 +# _CLEAR = 0 +ERR_ESTIMATE=0 + +#NTP server +NTP_SERVER=time.izatcloud.net + +#XTRA CA path +XTRA_CA_PATH=/usr/lib/ssl/certs + +# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info +# 4 - Debug, 5 - Verbose +# If DEBUG_LEVEL is commented, Android's logging levels will be used +DEBUG_LEVEL = 2 + +# Intermediate position report, 1=enable, 0=disable +#INTERMEDIATE_POS=0 + +# supl version 1.0 +#SUPL_VER=0x10000 + +# Emergency SUPL, 1=enable, 0=disable +#SUPL_ES=1 + +#Choose PDN for Emergency SUPL +#1 - Use emergency PDN +#0 - Use regular SUPL PDN for Emergency SUPL +#USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=0 + +#SUPL_MODE is a bit mask set in config.xml per carrier by default. +#If it is uncommented here, this value will overwrite the value from +#config.xml. +#MSA=0X2 +#MSB=0X1 +#SUPL_MODE= + +# GPS Capabilities bit mask +# SCHEDULING = 0x01 +# MSB = 0x02 +# MSA = 0x04 +# ON_DEMAND_TIME = 0x10 +# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING +CAPABILITIES=0x77 + +# Accuracy threshold for intermediate positions +# less accurate positions are ignored, 0 for passing all positions +# ACCURACY_THRES=5000 + +################################ +##### AGPS server settings ##### +################################ + +# FOR SUPL SUPPORT, set the following +# SUPL_HOST=supl.host.com or IP +# SUPL_PORT=1234 + +# FOR MO SUPL SUPPORT, set the following +# MO_SUPL_HOST=supl.host.com or IP +# MO_SUPL_PORT=1234 + +# FOR C2K PDE SUPPORT, set the following +# C2K_HOST=c2k.pde.com or IP +# C2K_PORT=1234 + +# Bitmask of slots that are available +# for write/install to, where 1s indicate writable, +# and the default value is 0 where no slots +# are writable. For example, AGPS_CERT_WRITABLE_MASK +# of b1000001010 makes 3 slots available +# and the remaining 7 slots unwritable. +#AGPS_CERT_WRITABLE_MASK=0 + +#################################### + # LTE Positioning Profile Settings +#################################### +# LPP_PROFILE is a bit mask(unit8 in HAL interface) +# 0: Enable RRLP on LTE(Default) +# 0x01: LPP User Plane +# 0x02: LPP Control Plane +# 0x04: LPP User Plane for NR5G +# 0x08: LPP Control Plane for NR5G +# Mot modification +# 0x10: LPPe CP DBH +# 0x20: LPPe CP WLAN +# 0x40: LPPe UP DBH +# 0x80: LPPe UP WLAN +# TMO = 0x32 (50) LPP CP, RRLP UP, LPPe CP DBH & WLAN, LPPe CP UBP if product support pressure sensor +# ATT = 0x33 (51) LPP CP, LPP UP, LPPe CP DBH & WLAN, LPPe CP UBP if product support pressure sensor +# VzW = 0xF3 (243) LPP CP, LPP UP, LPPe CP DBH & WLAN, LPPe UP DBH & WLAN, LPPe CP & UP UBP if product support pressure sensor +#LPP_PROFILE = 2 + +#################################### +#Datum Type +#################################### +# 0: WGS-84 +# 1: PZ-90 +#DATUM_TYPE = 0 + +################################ +# EXTRA SETTINGS +################################ +# NMEA provider (1=Modem Processor, 0=Application Processor) +#NMEA_PROVIDER=0 +# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) +#SGLTE_TARGET=0 + +################################################## +# Select Positioning Protocol on A-GLONASS system +################################################## +# 0x1: RRC CPlane +# 0x2: RRLP UPlane +# 0x4: LLP Uplane +#A_GLONASS_POS_PROTOCOL_SELECT = 0 +# +################################################## +# Select technology for LPPe Control Plane +################################################## +# 0x1: DBH for LPPe CP +# 0x2: WLAN AP Measurements for LPPe CP +# 0x4: SRN AP measurement for CP +# 0x8: Sensor Barometer Measurement LPPe CP +#LPPE_CP_TECHNOLOGY = 0 + +################################################## +# Select technology for LPPe User Plane +################################################## +# 0x1: DBH for LPPe UP +# 0x2: WLAN AP Measurements for LPPe UP +# 0x4: SRN AP measurement for UP +# 0x8: Sensor Barometer Measurement LPPe UP +#LPPE_UP_TECHNOLOGY = 0 + +################################################## +# AGPS_CONFIG_INJECT +################################################## +# enable/disable injection of AGPS configurations: +# SUPL_VER +# SUPL_HOST +# SUPL_PORT +# MO_SUPL_HOST +# MO_SUPL_PORT +# C2K_HOST +# C2K_PORT +# LPP_PROFILE +# A_GLONASS_POS_PROTOCOL_SELECT +# 0: disable +# 1: enable +#AGPS_CONFIG_INJECT = 1 + +################################################## +# GNSS settings for automotive use cases +# Configurations in following section are +# specific to automotive use cases, others +# please do not change, keep the default values +################################################## + +# AP Coarse Timestamp Uncertainty +################################################## +# default : 10 +# AP time stamp uncertainty, until GNSS receiver +# is able to acquire better timing information +#AP_TIMESTAMP_UNCERTAINTY = 10 + +################################################## +# QDR engine availability status +################################################## +# 0 : NO QDR (default) +# 1 : QDR enabled +# This settings enables QDR Configuration for +# automotive use case, if enabled then +# DR_AP_Service needs to be enabled in izat.conf +#EXTERNAL_DR_ENABLED = 0 + +##################################### +# DR_SYNC Pulse Availability +##################################### +# 0 : DR_SYNC pulse not available (default) +# 1 : DR_SYNC pulse available +# This configuration enables the driver to make use +# of PPS events generated by DR_SYNC pulse +# Standard Linux PPS driver needs to be enabled +#DR_SYNC_ENABLED = 0 + +##################################### +# PPS Device name +##################################### +#PPS_DEVICENAME = /dev/pps0 + +##################################### +# Ignore PPS at Startup and after long outage +##################################### +#IGNORE_PPS_PULSE_COUNT = 1 + +##################################### +# Long GNSS RF outage in seconds +##################################### +#GNSS_OUTAGE_DURATION = 10 + +##################################### +# AP Clock Accuracy +##################################### +# Quality of APPS processor clock (in PPM). +# Value specified is used for calculation of +# APPS time stamp uncertainty +#AP_CLOCK_PPM = 100 + +##################################### +# MAX ms difference to detect missing pulse +##################################### +# Specifies time threshold in ms to validate any missing PPS pulses +#MISSING_PULSE_TIME_DELTA = 900 + +##################################### +# Propagation time uncertainty +##################################### +# This settings enables time uncertainty propagation +# logic incase of missing PPS pulse +#PROPAGATION_TIME_UNCERTAINTY = 1 + +####################################### +# APN / IP Type Configuration +# APN and IP Type to use for setting +# up WWAN call. +# Use below values for IP Type: +# v4 = 4 +# v6 = 6 +# v4v6 = 10 +####################################### +# INTERNET_APN = abc.xyz +# INTERNET_IP_TYPE = 4 +# SUPL_APN = abc.xyz +# SUPL_IP_TYPE = 4 + +##################################### +# Modem type +##################################### +# This setting configures modem type +# (external=0 or internal=1) +# comment out the next line to vote +# for the first modem in the list +MODEM_TYPE = 1 + +################################################## +# CONSTRAINED TIME UNCERTAINTY MODE +################################################## +# 0 : disabled (default) +# 1 : enabled +# This setting enables GPS engine to keep its time +# uncertainty below the specified constraint +#CONSTRAINED_TIME_UNCERTAINTY_ENABLED = 0 + +# If constrained time uncertainty mode is enabled, +# this setting specifies the time uncertainty +# threshold that gps engine need to maintain. +# In unit of milli-seconds. +# Default is 0.0 meaning that modem default value +# of time uncertainty threshold will be used. +#CONSTRAINED_TIME_UNCERTAINTY_THRESHOLD = 0.0 + +# If constrained time uncertainty mode is enabled, +# this setting specifies the power budget that +# gps engine is allowed to spend to maintain the time +# uncertainty. +# Default is 0 meaning that GPS engine is not constained +# by power budget and can spend as much power as needed. +# In unit of 0.1 milli watt second. +#CONSTRAINED_TIME_UNCERTAINTY_ENERGY_BUDGET = 0 + +################################################## +# POSITION ASSISTED CLOCK ESTIMATOR +################################################## +# 0 : disabled (default) +# 1 : enabled +# This setting enables GPS engine to estimate clock +# bias and drift when the signal from at least 1 +# SV is available and the UE’s position is known by +# other position engines. +#POSITION_ASSISTED_CLOCK_ESTIMATOR_ENABLED = 0 + +##################################### +# CP_MTLR_ES +##################################### +# CP MTLR ES, 1=enable, 0=disable +#CP_MTLR_ES=0 + +################################################## +# GNSS_DEPLOYMENT +################################################## +# 0 : Enable QTI GNSS (default) +# 1 : Enable QCSR SS5 +# This setting use to select between QTI GNSS +# and QCSR SS5 hardware receiver. +# By default QTI GNSS receiver is enabled. +# GNSS_DEPLOYMENT = 0 diff --git a/gps/izat.conf b/gps/izat.conf new file mode 100644 index 0000000..f6a3ad6 --- /dev/null +++ b/gps/izat.conf @@ -0,0 +1,282 @@ +######################################### +# Log verbosity control for izat modules +######################################### +# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5 +IZAT_DEBUG_LEVEL = 5 + +################################################## +# Select WIFI Wait Timeout value in seconds for SUPL +################################################## +WIFI_WAIT_TIMEOUT_SELECT = 0 + +################################################## +# Time interval of injecting SRN scan data to modem +# time in seconds. +# Note: recommended value is between 1-5 sec +################################################## +LPPE_SRN_DATA_SCAN_INJECT_TIME=2 + +################################################## +# Identify this target as OTA updated or new +# 0 - New target +# 1 - OTA updated +################################################## +OTA_UPDATED_TARGET=0 + +################################ +# NLP Settings +################################ +# NLP_MODE 1: OSNLP Only, 2: QNP Only, 3: Combo, 4: QNP preferred +# For Automotive products, please use NLP_MODE = 4 only. +# NLP_TOLERANCE_TIME_FIRST: Time in ms used in Combo mode +# to determine how much Tolerance for first position +# NLP_TOLERANCE_TIME_AFTER: Time in ms used in Combo mode +# to determine how much Tolerance for positions after first +# NLP_THRESHOLD: Sets how many failures needed before +# switching preferred NLP in Combo mode +# NLP_ACCURACY_MULTIPLE: Determines how far off the accuracy +# must be, in multiples, between two NLP location reports to +# be considered much worse accuracy. Used in switching logic +# NLP COMBO MODE USES QNP WITH NO EULA CONSENT: Determines +# whether or not to still send network location requests to +# QNP when the EULA is not consented to by the user. QNP can +# still return ZPP locations or injected locations even +# without EULA consent, but the uncertainty can be high. +# QNP preferred mode prefers QNP when there is EULA consent, +# otherwise OSNLP is used. +NLP_MODE = 1 +NLP_MODE_EMERGENCY = 2 +NLP_TOLERANCE_TIME_FIRST = 5000 +NLP_TOLERANCE_TIME_AFTER = 20000 +NLP_THRESHOLD = 3 +NLP_ACCURACY_MULTIPLE = 2 +NLP_COMBO_MODE_USES_QNP_WITH_NO_EULA_CONSENT = 1 + +######################################### +# NLP PACKAGE SETTINGS +######################################### +# OSNLP_PACKAGE: name of default NLP package +OSNLP_PACKAGE = com.google.android.gms +# REGION_OSNLP_PACKAGE: +# This value will be used as alternative +# for particular region where default NLP is not functional. +#REGION_OSNLP_PACKAGE = + +################################### +# GEOFENCE SERVICES +################################### +# If set to one of the defined values below, it will override +# the responsiveness for geofence services, which implements +# the Proximity Alert API. If not set to a value defined below, +# which is default, it will not override the responsivness. +# The geofence HAL API is unaffected by this value. +# GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE Values: +# 1: LOW responsiveness +# 2: MEDIUM responsiveness +# 3: HIGH responsiveness +GEOFENCE_SERVICES_RESPONSIVENESS_OVERRIDE = 0 + +##################################### +#GTP Opt-In app +##################################### + +#GTP privacy policy version url +#https support is required +GTP_PRIVACY_VERSION_URL = https://info.izatcloud.net/privacy/version.html + +#GTP privacy policy version download retry interval +#unit is second. default is 86400 +GTP_PRIVACY_RETRY_INTERVAL = 86400 + +##################################### +# IZAT PREMIUM FEATURE SETTINGS +##################################### +#Possible states of a feature: +#DISABLED +#BASIC +#PREMIUM + +#GTP_MODE valid modes: +# DISABLED +# LEGACY_WWAN +# SDK (WWAN not available for Modems before LocTech 10.0) +GTP_MODE=DISABLED + +#GTP_WAA valid modes: +# DISABLED +# BASIC +GTP_WAA=DISABLED + +#SAP valid modes: +# DISABLED +# BASIC +# PREMIUM +# MODEM_DEFAULT +SAP=MODEM_DEFAULT + +#FREE_WIFI_SCAN_INJECT valid modes: +#DISABLED +#BASIC +FREE_WIFI_SCAN_INJECT=BASIC + +#SUPL_WIFI valid modes: +#DISABLED +#BASIC +SUPL_WIFI=BASIC + +#WIFI_SUPPLICANT_INFO valid modes: +#DISABLED +#BASIC +WIFI_SUPPLICANT_INFO=BASIC + +##################################### +# Location process launcher settings +##################################### + +# DO NOT MODIFY +# Modifying below attributes without +# caution can have serious implications. + +#Values for PROCESS_STATE: +# ENABLED +# DISABLED + +#Values for LOW_RAM_TARGETS: +# ENABLED +# DISABLED +# Property to enable/disable processes for low ram targets. Uses ro.config.low_ram property +# to identify low ram targets. + +#PROCESS_NAME +# Name of the executable file. + +#FEATURE MASKS: +# GTP-WIFI 0X03 +# GTP-MP-CELL 0xc00 +# GTP-WAA 0x100 +# SAP 0Xc0 +# ODCPI 0x1000 +# FREE_WIFI_SCAN_INJECT 0x2000 +# SUPL_WIFI 0x4000 +# WIFI_SUPPLICANT_INFO 0x8000 + +#Values for PLATFORMS can be: +#1. Any valid values obtained from ro.board.platform separated by single space. For example: msm8960 msm8226 +#2. 'all' or 'all exclude' -> for All platforms +#3. 'all exclude XXXX' -> All platforms exclude XXXX. For example: all exclude msm8937 + +#Values for SOC_IDS can be: +#1. Any valid values obtained from soc_id node separated by single space. For example: 339 386 436 +## soc_id value can be obtained from any one of below node: +## - /sys/devices/soc0/soc_id +## - /sys/devices/system/soc/soc0/id +#2. 'all' or 'all exclude' -> for All soc id's +#3. 'all exclude XXXX' -> All soc id's exclude XXXX. For example: all exclude 339 386 + +#Values for BASEBAND can be: +#1. Any valid values obtained from ro.baseband separated by single space. For example: sglte sglte2 +#2. 'all' or 'all exclude' -> for all basebands +#3. 'all exclude XXXX' -> All basebands exclude XXXX. For example: all exclude sglte +PROCESS_NAME=lowi-server +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=gps wifi inet oem_2901 +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0xf303 +PLATFORMS=all +SOC_IDS=all +BASEBAND=all +LOW_RAM_TARGETS=DISABLED +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=0 + +PROCESS_NAME=xtwifi-inet-agent +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=inet gps +PREMIUM_FEATURE=1 +IZAT_FEATURE_MASK=0xc03 +PLATFORMS=all +SOC_IDS=all exclude 386 436 +BASEBAND=all +LOW_RAM_TARGETS=DISABLED +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +PROCESS_NAME=xtwifi-client +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=wifi inet gps system oem_2904 +PREMIUM_FEATURE=1 +IZAT_FEATURE_MASK=0xd03 +PLATFORMS=all +SOC_IDS=all exclude 386 436 +BASEBAND=all +LOW_RAM_TARGETS=DISABLED +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +PROCESS_NAME=slim_daemon +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=gps oem_2901 can plugdev diag sensors +PREMIUM_FEATURE=1 +IZAT_FEATURE_MASK=0xf0 +PLATFORMS=all +SOC_IDS=all exclude 386 436 +BASEBAND=all +LOW_RAM_TARGETS=DISABLED +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +PROCESS_NAME=xtra-daemon +PROCESS_ARGUMENT= +PROCESS_STATE=ENABLED +PROCESS_GROUPS=inet gps system +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0 +PLATFORMS=all +SOC_IDS=all +BASEBAND=all +LOW_RAM_TARGETS=ENABLED +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=0 + +######################################## +# Engine Service which host DRE module # +# To enable DRE engine service, change # +# PROCESS_STATE=ENABLED # +######################################## +PROCESS_NAME=engine-service +PROCESS_ARGUMENT=DRE-INT libloc_epDr.so +PROCESS_STATE=DISABLED +PROCESS_GROUPS=gps diag inet qwes oem_2901 system +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0 +PLATFORMS=all +SOC_IDS=all +BASEBAND=all +LOW_RAM_TARGETS=DISABLED +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 + +######################################## +# Engine Service which host PPE module # +# To enable PPE engine service, change # +# PROCESS_STATE=ENABLED # +# and update process arugements # +# with PPE library name # +#PROCESS_ARGUMENT=PPE libepsimulator.so# +######################################## +PROCESS_NAME=engine-service +PROCESS_ARGUMENT=PPE libepsimulator.so +PROCESS_STATE=DISABLED +PROCESS_GROUPS=gps diag inet oem_2901 +PREMIUM_FEATURE=0 +IZAT_FEATURE_MASK=0 +PLATFORMS=all +SOC_IDS=all +BASEBAND=all +LOW_RAM_TARGETS=DISABLED +HARDWARE_TYPE=all +VENDOR_ENHANCED_PROCESS=1 diff --git a/gps/lowi.conf b/gps/lowi.conf new file mode 100644 index 0000000..83ab1bf --- /dev/null +++ b/gps/lowi.conf @@ -0,0 +1,27 @@ +#*====*====*====*====*====*====*====*====*====*====*====*====*====*====*====* +# +# LOWI Config file - default +# +# GENERAL DESCRIPTION +# This file contains the config params for LOWI +# +# Copyright (c) 2019 Qualcomm Technologies, Inc. +# All Rights Reserved. +# Confidential and Proprietary - Qualcomm Technologies, Inc. +# +# 2012-2013 Qualcomm Atheros, Inc. +# All Rights Reserved. +# Qualcomm Atheros Confidential and Proprietary. +# +# Export of this technology or software is regulated by the U.S. Government. +# Diversion contrary to U.S. law prohibited. +#=============================================================================*/ + +# X86 ONLY - UBUNTU: +# Copy this file in the same directory where the executable is + +# Log level +# EL_LOG_OFF = 0, EL_ERROR = 1, EL_WARNING = 2, EL_INFO = 3, EL_DEBUG = 4, EL_VERBOSE = 5, EL_LOG_ALL = 100 +LOWI_LOG_LEVEL = 4 +LOWI_USE_LOWI_LP = 0 + diff --git a/gps/sap.conf b/gps/sap.conf new file mode 100644 index 0000000..a077b3c --- /dev/null +++ b/gps/sap.conf @@ -0,0 +1,161 @@ +################################ +# Sensor Settings +################################ +#The following parameters are optional. +#Internal defaults support MEMS sensors +#native to most handset devices. +#Device specific sensor characterization +#for improved performance is possible as +#described in SAP application notes. +#GYRO_BIAS_RANDOM_WALK= +#ACCEL_RANDOM_WALK_SPECTRAL_DENSITY= +#ANGLE_RANDOM_WALK_SPECTRAL_DENSITY= +#RATE_RANDOM_WALK_SPECTRAL_DENSITY= +#VELOCITY_RANDOM_WALK_SPECTRAL_DENSITY= + +# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0) +# used in loc_eng_reinit +SENSOR_ACCEL_BATCHES_PER_SEC=2 +SENSOR_ACCEL_SAMPLES_PER_BATCH=5 +SENSOR_GYRO_BATCHES_PER_SEC=2 +SENSOR_GYRO_SAMPLES_PER_BATCH=5 +# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0) +SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4 +SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25 +SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4 +SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25 + +# Sensor Control Mode (0=AUTO, 1=FORCE_ON, 2=MODEM_DEFAULT) +# used in loc_eng_reinit +SENSOR_CONTROL_MODE=2 + +# Bit mask used to define which sensor algorithms are used. +# Setting each bit has the following definition: +# 0x1 - DISABLE_INS_POSITIONING_FILTER +# 0x0 - ENABLE_INS_POSITIONING_FILTER +SENSOR_ALGORITHM_CONFIG_MASK=0x1 + +#Vehicle Network Provider configuration + +#Service configuration strings +#The number before colon in VN_X items defines version of the format of the rest of the string +#VN_ACCEL_CFG=0:5 +#VN_GYRO_CFG=0:5.5 +#VN_ODOMETRY_CFG=0:2,4.5 + +################################################ +# QDR3 configurations # +################################################ +VN_SPEED_CFG=1:131,5,8,1,2,3,1,1,9,2,14,2 +VN_GEAR_CFG=1:422,20,4,0,4,1,9,0,1,2,3,4,5,6,7,8 + +################################################ +# QDR2-Gyro configurations # +################################################ +#VN_GYRO_CFG=1:555,0,1,0,0,0,0,-6.5,6.6066,-6.5,-1.00,2,6.607,6.6068,0,0,16,0.0002,0,16,0.0002,0,16,0.0002 +#VN_SPEED_CFG=1:555,0,0,1,2,1,0.01,0,56,8,48,8 +#VN_GEAR_CFG=1:555,16,4,0,1,1,9,0,1,2,3,4,5,6,7,8 + +################################################ +# QDR2-DWT configurations # +################################################ +#VN_SPEED_CFG=1:555,22,1,2,1,1,1,0,8,8,23,1,2,0,1,0,8,8,23,1 +#VN_GEAR_CFG=1:555,12,4,16,14,16,8,1,2,3,4,5,6,7,8 +#VN_DWS_CFG=1:555,0,0,1,3,1,1,0,0,8,0,0,8,8,0,0,16,8,0,0,24,8,0,0 +#VN_GYRO_CFG=1:555,40,16,1.0,40,16,1.0,40,16,1.0 + +##################################################################################### +# VNW service batching configuration strings # +# VNW provider will initialize default type as Time based batching # +# Each service batch value is configured to be 100 # +# VN_ACCEL_CFG_BATCH_VALUE will be treated as time in Ms if VN_CFG_BATCH_TYPE # +# is set to time based batching # +# VN_ACCEL_CFG_BATCH_VALUE will be treated as sample count if VN_CFG_BATCH_TYPE # +# is set to count based batching # +# Uncomment and update batch time /sample count as per selected batching type # +##################################################################################### +# Batching type +# 1 - Time based (default) +# 2 - Count based +#VN_CFG_BATCH_TYPE=1 + +#Vehicle Accel batching value, it can either accept time in milli seconds or sample count +#VN_ACCEL_CFG_BATCH_VALUE=100 + +#Vehicle Gyro batching value, it can either accept time in milli seconds or sample count +#VN_GYRO_CFG_BATCH_VALUE=100 + +#Vehicle Odo batching value, it can either accept time in milli seconds or sample count +#VN_ODOMETRY_CFG_BATCH_VALUE=100 + +#Vehicle Speed batching value, it can either accept time in milli seconds or sample count +#VN_SPEED_CFG_BATCH_VALUE=100 + +#Vehicle Gear batching value, it can either accept time in milli seconds or sample count +#VN_GEAR_CFG_BATCH_VALUE=100 + +#Vehicle DWS batching value, it can either accept time in milli seconds or sample count +#VN_DWS_CFG_BATCH_VALUE=100 +#################################################################################### + +#Procesors clock ratio: AP and CAN bus microcontroller +################################################ +# QDR3 configurations # +################################################ +VN_PROC_CLOCK_RATIO=1.0 + +################################################ +# QDR2-DWT OR QDR2-Gyro configurations # +################################################ +#VN_PROC_CLOCK_RATIO = 1.0 + +# Time source used by Sensor HAL +# Setting this value controls accuracy of location sensor services. +# 0 - Unknown +# 1 - CLOCK_BOOTTIME +# 2 - CLOCK_MONOTONIC +# 3 - CLOCK_REALTIME +# 4 - CLOCK_BOOTTIME using Alarm timer interface +NDK_PROVIDER_TIME_SOURCE=1 + +# Sensor Batching Configuration +# 0 - Time based +# 1 - Fixed count based +# 2 - Variable count based +COUNT_BASED_BATCHING=1 +SYNC_ONCE=0 + +#Sensor HAL Provider Configuration HAL Library name including path +################################################ +# # +# Configuration for BMI 160 Sensor # +# # +################################################ +SENSOR_TYPE=2 +SENSOR_HAL_LIB_PATH=/usr/lib/libbmi160sensors.so.1 + +################################################ +# # +# Configuration for ASM330 Sensor # +# # +################################################ +#SENSOR_TYPE=1 +#SENSOR_HAL_LIB_PATH=/usr/lib/libasm330sensors.so.1 + + +################################################ +# # +# Configuration for IAM20680 Sensor # +# # +################################################ +#SENSOR_TYPE=3 +#SENSOR_HAL_LIB_PATH=/usr/lib/libiam20680sensors.so.1 + + +################################################ +# # +# Configuration for SMI130 Sensor # +# # +################################################ +#SENSOR_TYPE=4 +#SENSOR_HAL_LIB_PATH=/usr/lib/libsmi130sensors.so.1 diff --git a/gps/xtwifi.conf b/gps/xtwifi.conf new file mode 100644 index 0000000..5d7df9e --- /dev/null +++ b/gps/xtwifi.conf @@ -0,0 +1,78 @@ +#GTP AP Project client core config file +# +#GENERAL DESCRIPTION +#This is used by client core +# +#Copyright (c) 2012-2014 Qualcomm Atheros, Inc. +#All Rights Reserved. +#Qualcomm Atheros Confidential and Proprietary. +# +#Copyright (c) 2017 Qualcomm Technologies, Inc. +#All Rights Reserved. +#Confidential and Proprietary - Qualcomm Technologies, Inc. + +############################################################################## +# non-IOT devices configuration items # +# For non-IOT devices, configure below configuration items # +# according to the app note: 80-NK218-1 and remove the configuration items # +# in section of "IOT devices configuration items". # +############################################################################## + +# ASN URI v2 to be used by some GTP AP modules that +# need to run with ASN URI v2 protocol. +XT_SERVER_ROOT_URL = https://gtp1.izatcloud.net:443/uds/v2 + +# ASN URI v3 to be used by GTP AP modules that +# can support ASN URI v3 protocol. +XT_SERVER_ROOT_URL_V3 = https://gtp1.izatcloud.net:443/uds/v3 + +# size, in bytes, of the cache on device +SIZE_BYTE_TOTAL_CACHE = 5000000 + +############################################################################## +# IOT devices configuration items # +# For IOT devices, configure below configuration items # +# according to the app note and remove the configuration items in section of # +# "non-IOT devices configuration items". # +############################################################################## + +# ASN URI v3 to be used by GTP AP modules that +# can support ASN URI v3 protocol. +# XT_SERVER_ROOT_URL_V3 = https://gtpma1.izatcloud.net:443/uds/v3 + +# 3: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed +# for any GTP requests, instead notification is sent to Izat SDK. +# WiFi crowdsourcing module is disabled. +# 4: Wi-Fi APDB injection via Izat SDK. GTP server is not accessed +# for any GTP requests, instead notification is sent to Izat SDK. +# WiFi crowdsourcing module is active, also accessed via Izat SDK. +# GTP_AP_MODE = 4 + +# 1: MP cell features relies on GTP AP for either download or upload +# 0: MP cell features does not rely on GTP AP +# GTP_AP_NEEDED_BY_MP_CELL = 1 + +############################################################################## +# Configuration items applicable to all devices # +############################################################################## + +# Log verbosity control for most of the GTP WiFi system, including native and +# Java componenets +# OFF = 0, ERROR = 1, WARNING = 2, INFO = 3, DEBUG = 4, VERBOSE = 5, ALL = 100 +DEBUG_GLOBAL_LOG_LEVEL = 2 + +# this is used at the server side to distinguish uploads from different maker/model +# default "Qualcomm" +OEM_ID_IN_REQUEST_TO_SERVER = "Qualcomm" + +# this is used at the server side to distinguish uploads from different maker/model +# default "UNKNOWN" +MODEL_ID_IN_REQUEST_TO_SERVER = "UNKNOWN" + +############################################################################## +# Qualcomm Network Location Provider config # +############################################################################## + +# Accuracy Threshold for NLP position. Position exceeds thsi threshold will be filtered out. +# Default is 25000 meters. +LARGE_ACCURACY_THRESHOLD_TO_FILTER_NLP_POSITION = 25000 diff --git a/sm8250.mk b/sm8250.mk index c727f4c..5424bf7 100644 --- a/sm8250.mk +++ b/sm8250.mk @@ -133,6 +133,15 @@ PRODUCT_PACKAGES += \ PRODUCT_PACKAGES += \ fastbootd +# GPS +PRODUCT_COPY_FILES += \ + $(LOCAL_PATH)/gps/flp.conf:$(TARGET_COPY_OUT_VENDOR)/etc/flp.conf \ + $(LOCAL_PATH)/gps/gps.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gps.conf \ + $(LOCAL_PATH)/gps/izat.conf:$(TARGET_COPY_OUT_VENDOR)/etc/izat.conf \ + $(LOCAL_PATH)/gps/lowi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/lowi.conf \ + $(LOCAL_PATH)/gps/sap.conf:$(TARGET_COPY_OUT_VENDOR)/etc/sap.conf \ + $(LOCAL_PATH)/gps/xtwifi.conf:$(TARGET_COPY_OUT_VENDOR)/etc/xtwifi.conf + # Health PRODUCT_PACKAGES += \ android.hardware.health@2.1-impl-qti \