From d18e5b996acc458a953c3732534da67b7e259025 Mon Sep 17 00:00:00 2001 From: SGCMarkus Date: Tue, 15 Feb 2022 23:14:13 +0100 Subject: [PATCH] sm8250-common: add wifi configs and build service --- BoardConfigCommon.mk | 15 +- sm8250.mk | 23 ++ wifi/p2p_supplicant_overlay.conf | 5 + wifi/qca6390/WCNSS_qcom_cfg.ini | 360 +++++++++++++++++++++++++++++++ wifi/qca6490/WCNSS_qcom_cfg.ini | 320 +++++++++++++++++++++++++++ wifi/wpa_supplicant_overlay.conf | 9 + 6 files changed, 731 insertions(+), 1 deletion(-) create mode 100644 wifi/p2p_supplicant_overlay.conf create mode 100644 wifi/qca6390/WCNSS_qcom_cfg.ini create mode 100644 wifi/qca6490/WCNSS_qcom_cfg.ini create mode 100644 wifi/wpa_supplicant_overlay.conf diff --git a/BoardConfigCommon.mk b/BoardConfigCommon.mk index 8b1eebb..a7f3c2d 100644 --- a/BoardConfigCommon.mk +++ b/BoardConfigCommon.mk @@ -149,7 +149,6 @@ TARGET_USERIMAGES_USE_F2FS := true # RIL ENABLE_VENDOR_RIL_SERVICE := true - # Verified Boot BOARD_AVB_ENABLE := true BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --set_hashtree_disabled_flag @@ -159,3 +158,17 @@ BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048 BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP) BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 1 + +# WiFi +BOARD_WLAN_DEVICE := qcwcn +BOARD_HOSTAPD_DRIVER := NL80211 +BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) +BOARD_WPA_SUPPLICANT_DRIVER := NL80211 +BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) +WIFI_DRIVER_DEFAULT := qca_cld3 +WIFI_DRIVER_STATE_CTRL_PARAM := "/dev/wlan" +WIFI_DRIVER_STATE_OFF := "OFF" +WIFI_DRIVER_STATE_ON := "ON" +WIFI_HIDL_FEATURE_DUAL_INTERFACE := true +WIFI_HIDL_UNIFIED_SUPPLICANT_SERVICE_RC_ENTRY := true +WPA_SUPPLICANT_VERSION := VER_0_8_X diff --git a/sm8250.mk b/sm8250.mk index 16aa597..c727f4c 100644 --- a/sm8250.mk +++ b/sm8250.mk @@ -292,3 +292,26 @@ PRODUCT_PACKAGES += \ PRODUCT_COPY_FILES += \ vendor/qcom/opensource/vibrator/excluded-input-devices.xml:$(TARGET_COPY_OUT_VENDOR)/etc/excluded-input-devices.xml + +# WiFi +PRODUCT_PACKAGES += \ + android.hardware.wifi@1.0-service \ + hostapd \ + libwpa_client \ + libwifi-hal-ctrl \ + libwifi-hal-qcom \ + vendor.qti.hardware.wifi.hostapd@1.0.vendor \ + vendor.qti.hardware.wifi.hostapd@1.1.vendor \ + vendor.qti.hardware.wifi.hostapd@1.2.vendor \ + vendor.qti.hardware.wifi.supplicant@2.0.vendor \ + vendor.qti.hardware.wifi.supplicant@2.1.vendor \ + vendor.qti.hardware.wifi.supplicant@2.2.vendor \ + WifiResCommon \ + wpa_supplicant \ + wpa_supplicant.conf + +PRODUCT_COPY_FILES += \ + $(LOCAL_PATH)/wifi/qca6390/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6390/WCNSS_qcom_cfg.ini \ + $(LOCAL_PATH)/wifi/qca6490/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6490/WCNSS_qcom_cfg.ini \ + $(LOCAL_PATH)/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \ + $(LOCAL_PATH)/wifi/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf diff --git a/wifi/p2p_supplicant_overlay.conf b/wifi/p2p_supplicant_overlay.conf new file mode 100644 index 0000000..69bb088 --- /dev/null +++ b/wifi/p2p_supplicant_overlay.conf @@ -0,0 +1,5 @@ +disable_scan_offload=1 +p2p_no_group_iface=1 +persistent_reconnect=1 +bss_max_count=400 +p2p_go_he=1 diff --git a/wifi/qca6390/WCNSS_qcom_cfg.ini b/wifi/qca6390/WCNSS_qcom_cfg.ini new file mode 100644 index 0000000..26a3331 --- /dev/null +++ b/wifi/qca6390/WCNSS_qcom_cfg.ini @@ -0,0 +1,360 @@ +# This file allows user to override the factory +# defaults for the WLAN Driver + +# Phy Mode (auto, b, g, n, etc) +# Valid values are 0-12, with 0(Min) = Auto, 12(Max) = 11ax +# 1 = 11abg, 2 = 11b, 3 = 11g, 4 = 11n, 5 = 11g only, 6 = 11n only +# 7 = 11b only 8 = 11ac only, 9 = 11ac, 12 = 11ax. +gDot11Mode=0 + +# UAPSD service interval for VO,VI, BE, BK traffic +InfraUapsdVoSrvIntv=0 +InfraUapsdViSrvIntv=0 +InfraUapsdBeSrvIntv=0 +InfraUapsdBkSrvIntv=0 + +# Flag to allow STA send AddTspec even when ACM is Off +gAddTSWhenACMIsOff=1 + +#Enable OBSS protection +gEnableApOBSSProt=1 + +# Maximum Tx power +# gTxPowerCap=30 + +# Fragmentation Threshold +# gFragmentationThreshold=2346 + +# RTS threshold +RTSThreshold=1048576 + +# WMM Enable/Disable +WmmIsEnabled=0 + +# 802.11d support +g11dSupportEnabled=0 + +# DFS Master Capability +gEnableDFSMasterCap=0 + +ImplicitQosIsEnabled=0 + +gNeighborScanTimerPeriod=200 +gNeighborLookupThreshold=76 + +# Legacy (non-ESE, non-802.11r) Fast Roaming Support +# To enable, set FastRoamEnabled=1 +# To disable, set FastRoamEnabled=0 +FastRoamEnabled=1 + +#Channel Bonding +gChannelBondingMode5GHz=1 + +#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). +#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link +#is idle for last 10 seconds.) For both active and power save clients. + +#Power save clients: DUT set TIM bit from 10th second onwards and till client +#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. + +#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not +#success still we try on 11th second if not tries on 12th and so on till 15th +#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any +#case DUT will detect client got removed in (10+5) seconds. +#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. + +#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and +#it is period where we send NULL frame. +#gApLinkMonitorPeriod = 10 +#gGoLinkMonitorPeriod = 10 + +#gApKeepAlivePeriod is time to spend to check whether frame +#are succeed to send or not. Hence total effective detection time is +#(gApLinkMonitorPeriod + gApKeepAlivePeriod) + +# Enable DFS channel roam +# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE +gAllowDFSChannelRoam=1 + +gVhtChannelWidth=2 + +# Set txchainmask and rxchainmask +# These parameters are used only if gEnable2x2 is 0 +# Valid values are 1,2 +# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. +# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. +gSetTxChainmask1x1=1 +gSetRxChainmask1x1=1 + +# MCC to SCC Switch mode: +# 0-Disable +# 1-Enable +# 2-Force SCC if same band, with SAP restart +# 3-Force SCC if same band, without SAP restart by sending (E)CSA +# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, +# without SAP restart by sending (E)CSA +gWlanMccToSccSwitchMode = 3 + +# 1=enable tx STBC; 0=disable +gEnableTXSTBC=1 + +#Enable/Disable Tx beamformee in SAP mode +gEnableTxBFeeSAP=1 + +# Enable Tx beamforming in VHT20MHz +# Valid values are 0,1. If commented out, the default value is 0. +# 0=disable, 1=enable +gEnableTxBFin20MHz=1 + +#Enable/Disable SU Tx beamformer support +gEnableTxSUBeamformer=1 + +# 802.11K support +gRrmEnable=1 + +# Maximum Receive AMPDU size (VHT only. Valid values: +# 0->8k 1->16k 2->32k 3->64k 4->128k) +gVhtAmpduLenExponent=7 + +# Maximum MPDU length (VHT only. Valid values: +# 0->3895 octets, 1->7991 octets, 2->11454 octets) +gVhtMpduLen=2 + +#Enable or Disable p2p device address administered +isP2pDeviceAddrAdministrated=1 + +#Enable VHT on 2.4Ghz +gEnableVhtFor24GHzBand=1 + +#Maximum number of offload peers supported +# gMaxOffloadPeers=2 + +# controlling the following offload patterns +# through ini parameter. Default value is 1 +# to disable set it to zero. ssdp = 0 +# Setup multicast pattern for mDNS 224.0.0.251, +# SSDP 239.255.255.250 and LLMNR 224.0.0.252 +ssdp=0 + +# RA filtering rate limit param, the current value would not +# help if the lifetime in RA is less than 3*60=3min. Then +# we need to change it, though it is uncommon. +# gRAFilterEnable=0 +gRArateLimitInterval=600 + +# Maximum number of concurrent connections +gMaxConcurrentActiveSessions=3 + +# Disable/Enable GreenAP +# 0 to disable, 1 to enable, default: 1 +gEnableGreenAp=1 + +#Enable/Disable LPASS support +# 0 to disable, 1 to enable +gEnableLpassSupport=1 + +# Whether userspace country code setting shld have priority +gCountryCodePriority=1 + +# Enable or Disable Multi-user MIMO +# 1=Enable (default), 0=Disable +gEnableMuBformee=1 + +# Enable support for TDLS +# 0 - disable +# 1 - enable +gEnableTDLSSupport=1 + +# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall +# initiate TDLS Discovery towards a peer whenever setup criteria (throughput +# and RSSI) is met and then will initiate teardown when teardown criteria +# (idle packet count and RSSI) is met. +# 0 - disable +# 1 - enable +gEnableTDLSImplicitTrigger=1 + +# Enable TDLS External Control. That is, user space application has to +# first configure a peer MAC in wlan driver towards which TDLS is desired. +# Device will establish TDLS only towards those configured peers whenever +# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS +# when teardown criteria (idle packet count and RSSI) is met. However, +# device will accept TDLS connection if it is initiated from any other peer, +# even if that peer is not configured. +# 0 - disable +# 1 - enable +# For TDLS External Control, Implicit Trigger must also be enabled. +gTDLSExternalControl=1 + +# Enable support for TDLS off-channel operation +# 0 - disable +# 1 - enable +# TDLS off-channel operation will be invoked when there is only one +# TDLS connection. +gEnableTDLSOffChannel=0 + +gEnableTDLSScan=1 + +# VHT Tx/Rx MCS values +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gVhtRxMCS=2 +gVhtTxMCS=2 + +# VHT Tx/Rx MCS values for 2x2 +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gEnable2x2=1 +gVhtRxMCS2x2=2 +gVhtTxMCS2x2=2 + +#IPA config is a bit mask and following are the configurations. +#bit0 IPA Enable +#bit1 IPA PRE Filter enable +#bit2 IPv6 enable +#bit3 IPA Resource Manager (RM) enable +#bit4 IPA Clock scaling enable +#bit5 IPA uC ENABLE +#bit6 IPA uC STA ENABLE +#bit8 IPA Real Time Debugging +gIPAConfig=0x7d +gIPADescSize=800 + +# Enable TCP Segmentation Offload +# 1 - enable 0 - disable +TSOEnable=1 + +# Enable Generic Receive Offload +# 1 - enable(default) 0 - disable +GROEnable=1 + +# Enable HT MPDU Density +# 4 for 2 micro sec +ght_mpdu_density=4 + +# Enable flow steering to enable multiple CEs for Rx flows. +# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. +# Parallel Rx paths. +# 1 - enable 0 - disable(default) +gEnableFlowSteering=1 + +# RPS map for different RX queues (seperate by spaces) +# Internally, the nibbles get swapped. +rpsRxQueueCpuMapList=f7 + +# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND +maxMSDUsPerRxInd=8 + +################ Datapath feature set End ################ + +################ NAN feature set start ################### + +# Enable NAN discovery (NAN 1.0) +# 1 - enable 0 - disable(default) +gEnableNanSupport=0 +# Enable NAN Datapath +genable_nan_datapath=0 + +################ NAN feature set end ##################### + +hostscan_adaptive_dwell_mode=1 + + +oce_enable_probe_req_deferral=0 + +oce_enable_probe_req_rate=0 + +enable_esp_for_roam=0 + +# Enable the FW crash inject +gEnableForceTargetAssert=1 + + +#Ignore peer information +gIgnorePeerErpInfo=1 + +#Enable Broadcast probe response. +g_enable_bcast_probe_rsp=0 + +# Enable/Disable rtt sta mac randomization +enable_rtt_mac_randomization=1 + +#Enable/Disable SNR monitoring +gEnableSNRMonitoring=1 + +# HTC Credit count for WMI operation +# 1 to serialize the WMI commands +# 0 default works with FW advertised credits, 2 credits usually +gWmiCreditCount=1 + +# Enable enhanced ACS +acs_with_more_param=1 +# bits 0-3: rssi weight +# bits 4-7: bss count weight +# bits 8-11: noise floor weight +# bits 12-15: channel free weight +# bits 16-19: tx power range weight +# bits 20-23: tx power throughput weight +# bits 24-31: reserved +AutoChannelSelectWeight=0x00fafafa + +# Enable/Disable broadcast TWT +bcast_twt=1 + +# Enable Runtime PM +# 0 - RTPM disabled, so CxPC aware RTPM will be disabled as well +# 1 - RTPM enabled, but CxPC aware RTPM disabled (i.e, Static Runtime PM) +# 2 - RTPM enabled and CxPC aware RTPM enabled as well (i.e, Dynamic Runtime PM) +gRuntimePM=2 +gRuntimePMDelay=500 + +# Enable broadcast logging to the userspace entities +gMulticastHostFwMsgs=1 +# Disable packetlog explicitly +gEnablePacketLog=0 + +# Set IPA bandwidth levels in mbps +gIPALowBandwidthMbps=100 +gIPAMediumBandwidthMbps=400 +gIPAHighBandwidthMbps=800 + +# Enable wlm_latency_enable feature +# 0 - disable, 1 - enable(default) +wlm_latency_enable=1 + +# This ini is used to give higher priority for 5g scc than dbs. +# It is bitmap per enum policy_mgr_con_mode. +# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system +# preference option, If 5G SCC needs higher priority than dbs, set it as 8. +g_prefer_5g_scc_to_dbs=8 + +#Add another interface while driver load +gEnableConcurrentSTA=wlan1 +#Enable ETSII SRD channels for ACS +etsi13_srd_chan_in_master_mode=1 + +# Disable channel bonding mode 24GHZ +gChannelBondingMode24GHz=0 + +#acs_policy - External ACS policy control +#0 -Preferable for ACS +#1 -Mandatory for ACS +acs_policy=0 + +#0 - Disallow STA+SAP SCC on DFS channel +#1 - Allow STA+SAP SCC on DFS channel with master mode disabled +#2-2 - enhance "1" +g_sta_sap_scc_on_dfs_chan=0 + +# 1 - Enable the host silent recovery +# 0 - Disable the host silent recovery +gEnableSelfRecovery=1 + +# turning QC BLM parameters +avoid_list_expiry_time=5 +black_list_expiry_time=1 +bad_bssid_counter_thresh=10 + +END + +# Note: Configuration parser would not read anything past the END marker + diff --git a/wifi/qca6490/WCNSS_qcom_cfg.ini b/wifi/qca6490/WCNSS_qcom_cfg.ini new file mode 100644 index 0000000..532aadd --- /dev/null +++ b/wifi/qca6490/WCNSS_qcom_cfg.ini @@ -0,0 +1,320 @@ +# This file allows user to override the factory +# defaults for the WLAN Driver + +# Phy Mode (auto, b, g, n, etc) +# Valid values are 0-12, with 0(Min) = Auto, 12(Max) = 11ax +# 1 = 11abg, 2 = 11b, 3 = 11g, 4 = 11n, 5 = 11g only, 6 = 11n only +# 7 = 11b only 8 = 11ac only, 9 = 11ac, 12 = 11ax. +gDot11Mode=0 + +# UAPSD service interval for VO,VI, BE, BK traffic +InfraUapsdVoSrvIntv=0 +InfraUapsdViSrvIntv=0 +InfraUapsdBeSrvIntv=0 +InfraUapsdBkSrvIntv=0 + +# Flag to allow STA send AddTspec even when ACM is Off +gAddTSWhenACMIsOff=1 + +#Enable OBSS protection +gEnableApOBSSProt=1 + +# Maximum Tx power +# gTxPowerCap=30 + +# Fragmentation Threshold +# gFragmentationThreshold=2346 + +# RTS threshold +RTSThreshold=1048576 + +# WMM Enable/Disable +WmmIsEnabled=0 + +# 802.11d support +g11dSupportEnabled=0 + +# DFS Master Capability +gEnableDFSMasterCap=1 + +ImplicitQosIsEnabled=0 + +gNeighborScanTimerPeriod=200 +gNeighborLookupThreshold=76 + +# Legacy (non-ESE, non-802.11r) Fast Roaming Support +# To enable, set FastRoamEnabled=1 +# To disable, set FastRoamEnabled=0 +FastRoamEnabled=1 + +#Channel Bonding +gChannelBondingMode5GHz=1 + +#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds). +#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link +#is idle for last 10 seconds.) For both active and power save clients. + +#Power save clients: DUT set TIM bit from 10th second onwards and till client +#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client. + +#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not +#success still we try on 11th second if not tries on 12th and so on till 15th +#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any +#case DUT will detect client got removed in (10+5) seconds. +#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod).. + +#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and +#it is period where we send NULL frame. +#gApLinkMonitorPeriod = 10 +#gGoLinkMonitorPeriod = 10 + +#gApKeepAlivePeriod is time to spend to check whether frame +#are succeed to send or not. Hence total effective detection time is +#(gApLinkMonitorPeriod + gApKeepAlivePeriod) + +# Enable DFS channel roam +# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE +gAllowDFSChannelRoam=1 + +gVhtChannelWidth=2 + +# Set txchainmask and rxchainmask +# These parameters are used only if gEnable2x2 is 0 +# Valid values are 1,2 +# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0. +# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1. +gSetTxChainmask1x1=1 +gSetRxChainmask1x1=1 + +# MCC to SCC Switch mode: +# 0-Disable +# 1-Enable +# 2-Force SCC if same band, with SAP restart +# 3-Force SCC if same band, without SAP restart by sending (E)CSA +# 4-Force SCC if same band (or) use SAP mandatory channel for DBS, +# without SAP restart by sending (E)CSA +gWlanMccToSccSwitchMode = 3 + +# 1=enable tx STBC; 0=disable +gEnableTXSTBC=1 + +#Enable/Disable Tx beamformee in SAP mode +gEnableTxBFeeSAP=1 + +# Enable Tx beamforming in VHT20MHz +# Valid values are 0,1. If commented out, the default value is 0. +# 0=disable, 1=enable +gEnableTxBFin20MHz=1 + +#Enable/Disable SU Tx beamformer support +gEnableTxSUBeamformer=1 + +# 802.11K support +gRrmEnable=1 + +# Maximum Receive AMPDU size (VHT only. Valid values: +# 0->8k 1->16k 2->32k 3->64k 4->128k) +gVhtAmpduLenExponent=7 + +# Maximum MPDU length (VHT only. Valid values: +# 0->3895 octets, 1->7991 octets, 2->11454 octets) +gVhtMpduLen=2 + +#Enable or Disable p2p device address administered +isP2pDeviceAddrAdministrated=0 + +#Enable VHT on 2.4Ghz +gEnableVhtFor24GHzBand=1 + +#Maximum number of offload peers supported +# gMaxOffloadPeers=2 + +# controlling the following offload patterns +# through ini parameter. Default value is 1 +# to disable set it to zero. ssdp = 0 +# Setup multicast pattern for mDNS 224.0.0.251, +# SSDP 239.255.255.250 and LLMNR 224.0.0.252 +ssdp=0 + +# RA filtering rate limit param, the current value would not +# help if the lifetime in RA is less than 3*60=3min. Then +# we need to change it, though it is uncommon. +# gRAFilterEnable=0 +gRArateLimitInterval=600 + +# Maximum number of concurrent connections +gMaxConcurrentActiveSessions=3 + +# Disable/Enable GreenAP +# 0 to disable, 1 to enable, default: 1 +gEnableGreenAp=0 + +#Enable/Disable LPASS support +# 0 to disable, 1 to enable +gEnableLpassSupport=1 + +# Whether userspace country code setting shld have priority +gCountryCodePriority=1 + +# Enable or Disable Multi-user MIMO +# 1=Enable (default), 0=Disable +gEnableMuBformee=1 + +# Enable TDLS External Control. That is, user space application has to +# first configure a peer MAC in wlan driver towards which TDLS is desired. +# Device will establish TDLS only towards those configured peers whenever +# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS +# when teardown criteria (idle packet count and RSSI) is met. However, +# device will accept TDLS connection if it is initiated from any other peer, +# even if that peer is not configured. +# 0 - disable +# 1 - enable +# For TDLS External Control, Implicit Trigger must also be enabled. +gTDLSExternalControl=1 + +# Enable support for TDLS off-channel operation +# 0 - disable +# 1 - enable +# TDLS off-channel operation will be invoked when there is only one +# TDLS connection. +gEnableTDLSOffChannel=1 + +# VHT Tx/Rx MCS values +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gVhtRxMCS=2 +gVhtTxMCS=2 + +# VHT Tx/Rx MCS values for 2x2 +# Valid values are 0,1,2. If commented out, the default value is 0. +# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9 +gEnable2x2=1 +gVhtRxMCS2x2=2 +gVhtTxMCS2x2=2 + +#IPA config is a bit mask and following are the configurations. +#bit0 IPA Enable +#bit1 IPA PRE Filter enable +#bit2 IPv6 enable +#bit3 IPA Resource Manager (RM) enable +#bit4 IPA Clock scaling enable +#bit5 IPA uC ENABLE +#bit6 IPA uC STA ENABLE +#bit8 IPA Real Time Debugging +gIPAConfig=0x7d +gIPADescSize=800 + +# Increase TCL ringsize +dp_tx_ring_size=3072 + +# Disable HW checksum for legacy modes +legacy_mode_csum_disable=1 + +# Enable TCP Segmentation Offload +# 1 - enable 0 - disable +TSOEnable=1 + +# Enable Generic Receive Offload +# 1 - enable(default) 0 - disable +GROEnable=1 + +# Enable HT MPDU Density +# 4 for 2 micro sec +ght_mpdu_density=4 + +# Enable flow steering to enable multiple CEs for Rx flows. +# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs. +# Parallel Rx paths. +# 1 - enable 0 - disable(default) +gEnableFlowSteering=1 + +# Enable Rx FISA support +# 0 - disable(default for non-QCA6490), 1 - enable(default for QCA6490) +dp_rx_fisa_enable=1 + +# FISA FSE flow table size +dp_rx_flow_search_table_size=128 + +# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND +maxMSDUsPerRxInd=8 + +gHandleLatencyCriticalClients=1 + +# RPS map for different RX queues (seperate by spaces) +# Internally, the nibbles get swapped. +rpsRxQueueCpuMapList=f7 + +################ Datapath feature set End ################ + +################ NAN feature set start ################### + +# Enable NAN discovery (NAN 1.0) +# 1 - enable 0 - disable(default) +gEnableNanSupport=1 +# Enable NAN Datapath +genable_nan_datapath=1 + +################ NAN feature set end ##################### + +hostscan_adaptive_dwell_mode=1 + +# Enable/Disable rtt sta mac randomization +enable_rtt_mac_randomization=1 + +#Enable/Disable SNR monitoring +gEnableSNRMonitoring=1 + +# HTC Credit count for WMI operation +# 1 to serialize the WMI commands +# 0 default works with FW advertised credits, 2 credits usually +gWmiCreditCount=1 + +# Enable enhanced ACS +acs_with_more_param=1 +# bits 0-3: rssi weight +# bits 4-7: bss count weight +# bits 8-11: noise floor weight +# bits 12-15: channel free weight +# bits 16-19: tx power range weight +# bits 20-23: tx power throughput weight +# bits 24-31: reserved +AutoChannelSelectWeight=0x00fafafa + +# Enable/Disable broadcast TWT +bcast_twt=1 + +# Enable Runtime PM +# 0 - RTPM disabled, so CxPC aware RTPM will be disabled as well +# 1 - RTPM enabled, but CxPC aware RTPM disabled (i.e, Static Runtime PM) +# 2 - RTPM enabled and CxPC aware RTPM enabled as well (i.e, Dynamic Runtime PM) +gRuntimePM=2 +gRuntimePMDelay=500 + +active_max_channel_time_6g=60 +passive_max_channel_time_6g=60 + +# Enable broadcast logging to the userspace entities +gMulticastHostFwMsgs=1 +# Disable packetlog explicitly +gEnablePacketLog=0 + +# Set IPA bandwidth levels in mbps +gIPALowBandwidthMbps=100 +gIPAMediumBandwidthMbps=400 +gIPAHighBandwidthMbps=800 + +# Enable wlm_latency_enable feature +# 0 - disable, 1 - enable(default) +wlm_latency_enable=1 +spectral_disable=1 + +# This ini is used to give higher priority for 5g scc than dbs. +# It is bitmap per enum policy_mgr_con_mode. +# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system +# preference option, If 5G SCC needs higher priority than dbs, set it as 8. +g_prefer_5g_scc_to_dbs=8 + +END + +# Note: Configuration parser would not read anything past the END marker + diff --git a/wifi/wpa_supplicant_overlay.conf b/wifi/wpa_supplicant_overlay.conf new file mode 100644 index 0000000..f09713d --- /dev/null +++ b/wifi/wpa_supplicant_overlay.conf @@ -0,0 +1,9 @@ +disable_scan_offload=1 +p2p_disabled=1 +tdls_external_control=1 +wowlan_triggers=magic_pkt +bss_max_count=400 +interworking=1 +config_methods=virtual_display virtual_push_button keypad +driver_param="no_rrm=1" +pmf=1