# This file allows user to override the factory
# defaults for the WLAN Driver

fw_timeout_crash=1
gDot11Mode=0
InfraUapsdVoSrvIntv=0
InfraUapsdViSrvIntv=0
InfraUapsdBeSrvIntv=0
InfraUapsdBkSrvIntv=0
gAddTSWhenACMIsOff=1
gEnableApOBSSProt=1
RTSThreshold=1048576
gDisableIntraBssFwd=0
g11dSupportEnabled=0
gEnableDFSMasterCap=1
gNeighborScanTimerPeriod=200
gNeighborLookupThreshold=76
gNeighborScanChannelMinTime=20
FastRoamEnabled=1
RoamRssiDiff=5
gRoamIntraBand=0
gChannelBondingMode5GHz=1
gEnableDFSChnlScan=1
gAllowDFSChannelRoam=1
gSetTxChainmask1x1=1
gSetRxChainmask1x1=1
gWlanMccToSccSwitchMode = 3
gEnableTXSTBC=1
gEnableTxBFeeSAP=1
gEnableTxBFin20MHz=1
gEnableTxSUBeamformer=1
gRrmEnable=1
gEnablefwprint=0
gVhtAmpduLenExponent=7
gVhtMpduLen=2

# WOW Enable/Disable.
# 0 - Disable both magic pattern match and pattern byte match.
# 1 - Enable magic pattern match on all interfaces.
# 2 - Enable pattern byte match on all interfaces.
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
# Default value of gEnableWoW is 3.
# gEnableWoW=0

#Enable or Disable p2p device address administered
isP2pDeviceAddrAdministrated=1

#Enable VHT on 2.4Ghz
gEnableVhtFor24GHzBand=1
gEnableLpassSupport=1
gCountryCodePriority=1
gEnableMuBformee=1
gTDLSExternalControl=1
gEnableTDLSOffChannel=1

################ Datapath feature set Begin ################
gBusBandwidthHighThreshold=2000
gBusBandwidthMediumThreshold=500
gBusBandwidthLowThreshold=150
gBusBandwidthComputeInterval=100
gVhtRxMCS=2
gVhtTxMCS=2
gEnable2x2=1
gVhtRxMCS2x2=2
gVhtTxMCS2x2=2
gIPAConfig=0x7d
gIPADescSize=800
dp_tx_ring_size=5120
dp_tx_compl_ring_size=8192
dp_tx_desc=6144
dp_tx_ext_desc=6144
gReorderOffloadSupported=1
gCEClassifyEnable=1
rx_mode=20
gEnableFastPath=1
gEnableIpTcpUdpChecksumOffload=1
TSOEnable=1
GROEnable=1
ght_mpdu_density=4
gEnableFlowSteering=1
ce_service_max_yield_time=500
ce_service_max_rx_ind_flush=1
maxMSDUsPerRxInd=8
gEnableNUDTracking=1
dp_rx_fisa_enable=1
dp_rx_flow_search_table_size=128
rpsRxQueueCpuMapList=07
legacy_mode_csum_disable=1
icmp_req_to_fw_mark_interval=200

################ Datapath feature set End ################

adaptive_dwell_mode_enabled=1
hostscan_adaptive_dwell_mode=1
adapt_dwell_lpf_weight=80
adapt_dwell_wifi_act_threshold=10
enable_rtt_mac_randomization=1
gEnableSNRMonitoring=1
gWmiCreditCount=1
acs_with_more_param=1
AutoChannelSelectWeight=0x00fafafa
bcast_twt=1
gRuntimePM=2
gRuntimePMDelay=500
gEnablePacketLog=0
gfine_time_meas_cap=0x0030D
oem_6g_support_disable=0

active_max_channel_time_2g=80
active_max_channel_time_6g=60
gPassiveMaxChannelTime=110
passive_max_channel_time_6g=60
g_prefer_5g_scc_to_dbs=8

# Enable cocurrent interface wlan1
gEnableConcurrentSTA=wlan1

# Enable Indoor channel support for MHS to turn on in 6Ghz
gindoor_channel_support=1

END

# Note: Configuration parser would not read anything past the END marker