sm8250-common: add wifi configs and build service
This commit is contained in:
SGCMarkus
parent
4060a1c051
commit
d18e5b996a
@ -149,7 +149,6 @@ TARGET_USERIMAGES_USE_F2FS := true
|
||||
# RIL
|
||||
ENABLE_VENDOR_RIL_SERVICE := true
|
||||
|
||||
|
||||
# Verified Boot
|
||||
BOARD_AVB_ENABLE := true
|
||||
BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS += --set_hashtree_disabled_flag
|
||||
@ -159,3 +158,17 @@ BOARD_AVB_VBMETA_SYSTEM_KEY_PATH := external/avb/test/data/testkey_rsa2048.pem
|
||||
BOARD_AVB_VBMETA_SYSTEM_ALGORITHM := SHA256_RSA2048
|
||||
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX := $(PLATFORM_SECURITY_PATCH_TIMESTAMP)
|
||||
BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION := 1
|
||||
|
||||
# WiFi
|
||||
BOARD_WLAN_DEVICE := qcwcn
|
||||
BOARD_HOSTAPD_DRIVER := NL80211
|
||||
BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
|
||||
BOARD_WPA_SUPPLICANT_DRIVER := NL80211
|
||||
BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
|
||||
WIFI_DRIVER_DEFAULT := qca_cld3
|
||||
WIFI_DRIVER_STATE_CTRL_PARAM := "/dev/wlan"
|
||||
WIFI_DRIVER_STATE_OFF := "OFF"
|
||||
WIFI_DRIVER_STATE_ON := "ON"
|
||||
WIFI_HIDL_FEATURE_DUAL_INTERFACE := true
|
||||
WIFI_HIDL_UNIFIED_SUPPLICANT_SERVICE_RC_ENTRY := true
|
||||
WPA_SUPPLICANT_VERSION := VER_0_8_X
|
||||
|
||||
23
sm8250.mk
23
sm8250.mk
@ -292,3 +292,26 @@ PRODUCT_PACKAGES += \
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
vendor/qcom/opensource/vibrator/excluded-input-devices.xml:$(TARGET_COPY_OUT_VENDOR)/etc/excluded-input-devices.xml
|
||||
|
||||
# WiFi
|
||||
PRODUCT_PACKAGES += \
|
||||
android.hardware.wifi@1.0-service \
|
||||
hostapd \
|
||||
libwpa_client \
|
||||
libwifi-hal-ctrl \
|
||||
libwifi-hal-qcom \
|
||||
vendor.qti.hardware.wifi.hostapd@1.0.vendor \
|
||||
vendor.qti.hardware.wifi.hostapd@1.1.vendor \
|
||||
vendor.qti.hardware.wifi.hostapd@1.2.vendor \
|
||||
vendor.qti.hardware.wifi.supplicant@2.0.vendor \
|
||||
vendor.qti.hardware.wifi.supplicant@2.1.vendor \
|
||||
vendor.qti.hardware.wifi.supplicant@2.2.vendor \
|
||||
WifiResCommon \
|
||||
wpa_supplicant \
|
||||
wpa_supplicant.conf
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(LOCAL_PATH)/wifi/qca6390/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6390/WCNSS_qcom_cfg.ini \
|
||||
$(LOCAL_PATH)/wifi/qca6490/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6490/WCNSS_qcom_cfg.ini \
|
||||
$(LOCAL_PATH)/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
|
||||
$(LOCAL_PATH)/wifi/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf
|
||||
|
||||
5
wifi/p2p_supplicant_overlay.conf
Normal file
5
wifi/p2p_supplicant_overlay.conf
Normal file
@ -0,0 +1,5 @@
|
||||
disable_scan_offload=1
|
||||
p2p_no_group_iface=1
|
||||
persistent_reconnect=1
|
||||
bss_max_count=400
|
||||
p2p_go_he=1
|
||||
360
wifi/qca6390/WCNSS_qcom_cfg.ini
Normal file
360
wifi/qca6390/WCNSS_qcom_cfg.ini
Normal file
@ -0,0 +1,360 @@
|
||||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-12, with 0(Min) = Auto, 12(Max) = 11ax
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 4 = 11n, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only, 9 = 11ac, 12 = 11ax.
|
||||
gDot11Mode=0
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
# Fragmentation Threshold
|
||||
# gFragmentationThreshold=2346
|
||||
|
||||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
g11dSupportEnabled=0
|
||||
|
||||
# DFS Master Capability
|
||||
gEnableDFSMasterCap=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
FastRoamEnabled=1
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
||||
|
||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
||||
#case DUT will detect client got removed in (10+5) seconds.
|
||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
||||
|
||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
||||
#it is period where we send NULL frame.
|
||||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
#(gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
# 2-Force SCC if same band, with SAP restart
|
||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
||||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
# Enable Tx beamforming in VHT20MHz
|
||||
# Valid values are 0,1. If commented out, the default value is 0.
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
gEnableTxSUBeamformer=1
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
||||
# Maximum MPDU length (VHT only. Valid values:
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=1
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
#Maximum number of offload peers supported
|
||||
# gMaxOffloadPeers=2
|
||||
|
||||
# controlling the following offload patterns
|
||||
# through ini parameter. Default value is 1
|
||||
# to disable set it to zero. ssdp = 0
|
||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
||||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Enable support for TDLS
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSSupport=1
|
||||
|
||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
||||
# (idle packet count and RSSI) is met.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSImplicitTrigger=1
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
||||
# device will accept TDLS connection if it is initiated from any other peer,
|
||||
# even if that peer is not configured.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
||||
gTDLSExternalControl=1
|
||||
|
||||
# Enable support for TDLS off-channel operation
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# TDLS off-channel operation will be invoked when there is only one
|
||||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=0
|
||||
|
||||
gEnableTDLSScan=1
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
|
||||
# VHT Tx/Rx MCS values for 2x2
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
|
||||
#IPA config is a bit mask and following are the configurations.
|
||||
#bit0 IPA Enable
|
||||
#bit1 IPA PRE Filter enable
|
||||
#bit2 IPv6 enable
|
||||
#bit3 IPA Resource Manager (RM) enable
|
||||
#bit4 IPA Clock scaling enable
|
||||
#bit5 IPA uC ENABLE
|
||||
#bit6 IPA uC STA ENABLE
|
||||
#bit8 IPA Real Time Debugging
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
TSOEnable=1
|
||||
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
GROEnable=1
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
ght_mpdu_density=4
|
||||
|
||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
||||
# Parallel Rx paths.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# RPS map for different RX queues (seperate by spaces)
|
||||
# Internally, the nibbles get swapped.
|
||||
rpsRxQueueCpuMapList=f7
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=0
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=0
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
|
||||
oce_enable_probe_req_deferral=0
|
||||
|
||||
oce_enable_probe_req_rate=0
|
||||
|
||||
enable_esp_for_roam=0
|
||||
|
||||
# Enable the FW crash inject
|
||||
gEnableForceTargetAssert=1
|
||||
|
||||
|
||||
#Ignore peer information
|
||||
gIgnorePeerErpInfo=1
|
||||
|
||||
#Enable Broadcast probe response.
|
||||
g_enable_bcast_probe_rsp=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Runtime PM
|
||||
# 0 - RTPM disabled, so CxPC aware RTPM will be disabled as well
|
||||
# 1 - RTPM enabled, but CxPC aware RTPM disabled (i.e, Static Runtime PM)
|
||||
# 2 - RTPM enabled and CxPC aware RTPM enabled as well (i.e, Dynamic Runtime PM)
|
||||
gRuntimePM=2
|
||||
gRuntimePMDelay=500
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
gEnablePacketLog=0
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
|
||||
# Enable wlm_latency_enable feature
|
||||
# 0 - disable, 1 - enable(default)
|
||||
wlm_latency_enable=1
|
||||
|
||||
# This ini is used to give higher priority for 5g scc than dbs.
|
||||
# It is bitmap per enum policy_mgr_con_mode.
|
||||
# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system
|
||||
# preference option, If 5G SCC needs higher priority than dbs, set it as 8.
|
||||
g_prefer_5g_scc_to_dbs=8
|
||||
|
||||
#Add another interface while driver load
|
||||
gEnableConcurrentSTA=wlan1
|
||||
#Enable ETSII SRD channels for ACS
|
||||
etsi13_srd_chan_in_master_mode=1
|
||||
|
||||
# Disable channel bonding mode 24GHZ
|
||||
gChannelBondingMode24GHz=0
|
||||
|
||||
#acs_policy - External ACS policy control
|
||||
#0 -Preferable for ACS
|
||||
#1 -Mandatory for ACS
|
||||
acs_policy=0
|
||||
|
||||
#0 - Disallow STA+SAP SCC on DFS channel
|
||||
#1 - Allow STA+SAP SCC on DFS channel with master mode disabled
|
||||
#2-2 - enhance "1"
|
||||
g_sta_sap_scc_on_dfs_chan=0
|
||||
|
||||
# 1 - Enable the host silent recovery
|
||||
# 0 - Disable the host silent recovery
|
||||
gEnableSelfRecovery=1
|
||||
|
||||
# turning QC BLM parameters
|
||||
avoid_list_expiry_time=5
|
||||
black_list_expiry_time=1
|
||||
bad_bssid_counter_thresh=10
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
320
wifi/qca6490/WCNSS_qcom_cfg.ini
Normal file
320
wifi/qca6490/WCNSS_qcom_cfg.ini
Normal file
@ -0,0 +1,320 @@
|
||||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-12, with 0(Min) = Auto, 12(Max) = 11ax
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 4 = 11n, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only, 9 = 11ac, 12 = 11ax.
|
||||
gDot11Mode=0
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
# Fragmentation Threshold
|
||||
# gFragmentationThreshold=2346
|
||||
|
||||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
g11dSupportEnabled=0
|
||||
|
||||
# DFS Master Capability
|
||||
gEnableDFSMasterCap=1
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
FastRoamEnabled=1
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
||||
|
||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
||||
#case DUT will detect client got removed in (10+5) seconds.
|
||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
||||
|
||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
||||
#it is period where we send NULL frame.
|
||||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
#(gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
# 2-Force SCC if same band, with SAP restart
|
||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
||||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
# Enable Tx beamforming in VHT20MHz
|
||||
# Valid values are 0,1. If commented out, the default value is 0.
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
gEnableTxSUBeamformer=1
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
||||
# Maximum MPDU length (VHT only. Valid values:
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
#Maximum number of offload peers supported
|
||||
# gMaxOffloadPeers=2
|
||||
|
||||
# controlling the following offload patterns
|
||||
# through ini parameter. Default value is 1
|
||||
# to disable set it to zero. ssdp = 0
|
||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
||||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
||||
# device will accept TDLS connection if it is initiated from any other peer,
|
||||
# even if that peer is not configured.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
||||
gTDLSExternalControl=1
|
||||
|
||||
# Enable support for TDLS off-channel operation
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# TDLS off-channel operation will be invoked when there is only one
|
||||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
|
||||
# VHT Tx/Rx MCS values for 2x2
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
|
||||
#IPA config is a bit mask and following are the configurations.
|
||||
#bit0 IPA Enable
|
||||
#bit1 IPA PRE Filter enable
|
||||
#bit2 IPv6 enable
|
||||
#bit3 IPA Resource Manager (RM) enable
|
||||
#bit4 IPA Clock scaling enable
|
||||
#bit5 IPA uC ENABLE
|
||||
#bit6 IPA uC STA ENABLE
|
||||
#bit8 IPA Real Time Debugging
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Increase TCL ringsize
|
||||
dp_tx_ring_size=3072
|
||||
|
||||
# Disable HW checksum for legacy modes
|
||||
legacy_mode_csum_disable=1
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
TSOEnable=1
|
||||
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
GROEnable=1
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
ght_mpdu_density=4
|
||||
|
||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
||||
# Parallel Rx paths.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# Enable Rx FISA support
|
||||
# 0 - disable(default for non-QCA6490), 1 - enable(default for QCA6490)
|
||||
dp_rx_fisa_enable=1
|
||||
|
||||
# FISA FSE flow table size
|
||||
dp_rx_flow_search_table_size=128
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
gHandleLatencyCriticalClients=1
|
||||
|
||||
# RPS map for different RX queues (seperate by spaces)
|
||||
# Internally, the nibbles get swapped.
|
||||
rpsRxQueueCpuMapList=f7
|
||||
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=1
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=1
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Runtime PM
|
||||
# 0 - RTPM disabled, so CxPC aware RTPM will be disabled as well
|
||||
# 1 - RTPM enabled, but CxPC aware RTPM disabled (i.e, Static Runtime PM)
|
||||
# 2 - RTPM enabled and CxPC aware RTPM enabled as well (i.e, Dynamic Runtime PM)
|
||||
gRuntimePM=2
|
||||
gRuntimePMDelay=500
|
||||
|
||||
active_max_channel_time_6g=60
|
||||
passive_max_channel_time_6g=60
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
gEnablePacketLog=0
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
|
||||
# Enable wlm_latency_enable feature
|
||||
# 0 - disable, 1 - enable(default)
|
||||
wlm_latency_enable=1
|
||||
spectral_disable=1
|
||||
|
||||
# This ini is used to give higher priority for 5g scc than dbs.
|
||||
# It is bitmap per enum policy_mgr_con_mode.
|
||||
# For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system
|
||||
# preference option, If 5G SCC needs higher priority than dbs, set it as 8.
|
||||
g_prefer_5g_scc_to_dbs=8
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
9
wifi/wpa_supplicant_overlay.conf
Normal file
9
wifi/wpa_supplicant_overlay.conf
Normal file
@ -0,0 +1,9 @@
|
||||
disable_scan_offload=1
|
||||
p2p_disabled=1
|
||||
tdls_external_control=1
|
||||
wowlan_triggers=magic_pkt
|
||||
bss_max_count=400
|
||||
interworking=1
|
||||
config_methods=virtual_display virtual_push_button keypad
|
||||
driver_param="no_rrm=1"
|
||||
pmf=1
|
||||
Loading…
x
Reference in New Issue
Block a user